Chapter 6 Information Settings and Display
6.3 Maintenance Information > show bad-data-info
show bad-data-info
This command displays either the bad data information for all of the volumes or for the specified volume(s).
■
Syntax
show bad-data-info [{-volume-number
■
Parameter
-volume-number
or
-volume-name
■
Output
Volume
Volume Type
Error LBA
LBA Count
Error Type
■
Example(s)
The following example displays bad data information for volume number #1:
CLI> show bad-data-info -volume-number 1
Volume
No.
Name
----- ---------------------------------------- ------------ ------------------ ------------------ ----------
1 VOL001
volume_numbers
Optional. This parameter specifies the volume identifiers to display bad data. One or more
parameters can be specified. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
Volume identifiers
No.
Volume number
Name
Volume name
Volume type
Start offset LBA of the bad data
Number of LBAs of the bad data
Error type
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -volume-name
"1.2.10 Volume Syntax" (page
Volume Type
Error LBA
Standard
0x0123456789ABCDEF 0xFEDCBA9876543210 Contiguity
701
volume_names
}]
26).
LBA Count
Error Type
P2X0-1210-05ENZ0