Table of Contents
Advertisement
Description
Heat Factor
Print Speed
Slew Speed
Dot Pattern Wide
Dot Pattern High
Label Advance
(Back Feed)
Form Edge Offset
Row Offset
Column Offset
Update Count on
Max. Label Width
Max. Label Length
Active Buffers
Cut By Amount
Edge/Reflective
If ALT-P parameters are changed while in the create/modify label
screen, the changes are saved with the label format. If they are
changed in the print label screen, they are not saved and will affect
only the current print job. Changing parameters in the print label
screen is useful when testing a new label to determine optimum
print parameter settings for that particular format.
F7 and ALT-I:
DMX 400/430 Operator's Manual
Creating Labels Using Internal Batach Software
Default
10
G
K
1
1
220
220
000
000
01
410
1200
1
0001
E
Table 3-2 Print Parameters
This function is used in the create/modify label
screen to insert a new field description line between
existing field description lines on the screen. It is
especially useful when the repeat function is used
and other lines on the screen are already below the
field to be repeated.
Range
0 to 20
C-G
C-K
1 or 2
1 to 3
Form Edge Offset + 20
050 to 999
000 to 999
000 to 410
01 to 99
050 to 410
0500 to 9999
1 or 2
0001 to 9999
E or R
33
Advertisement
Table of Contents
Troubleshooting
