Table of Contents
Advertisement
Configuring audio for Media Center
To configure multichannel audio output for Media Center
audio:
1
Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2
Click Settings, General, Media Center Setup,
and then Setup your Speakers. The Speaker
Setup screen displays.
3
Click Next.
4
Under Specify how many speakers you have, select
the speaker number that matches your system. For
example, select 5.1. Click Next.
5
Select Test. If you hear tones from all your speakers,
click Next. If you do not hear tones from all your
speakers, follow the onscreen instructions.
6
Click Finish.
Configuring audio for the DVD player
To configure multichannel audio output for the Media
Center DVD playback:
1
Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2
Click Settings, DVD, Audio, and then
Configuration.
140
HP Digital Entertainment Center
Reduce the volume level before changing
channels. Exercise particular caution when
changing from ATSC to NTSC channels. Your
analog NTSC channel audio levels may be
noticeably higher than your SD/HDTV
channel audio levels. The channel sound
volume is controlled by the content provider.
If your speaker configuration is not
displayed, click the Sound Effect (speaker)
icon in the desktop system tray.
3
Set sound output to match your speaker system.
For example, select 5.1 for analog audio
connections. If you have a digital audio connection,
select S/PDIF.
4
Click Save.
n
n
Advertisement
Table of Contents
