Ff1 0 05: Serial Ports - Panasonic DBS-576 Technical Manual
Section 400 programming
Hide thumbs
Also See for DBS-576:
- Technical manual (376 pages) ,
- Manual (362 pages) ,
- User manual (100 pages)
Table of Contents
Advertisement
FF1: System Programming
Introduction
FF1 0 05: Serial Ports
0
System
Configuration
Serial Port 1: Data Format
(all CPCs) - Version 1.0 or higher
Set data transmission format for Serial Port 1.
FF1
System
FF2
Trunks
FF3
Extensions
Notes:
FF4
FF-/Soft Keys
Serial Port 1: The RS-232C connector labeled "CN5" on the SCC Card. A printer (for data output) or
modem (for remote programming such as PCAS) can be connected to it.
If you use Serial Port 1, be sure to configure it here and in the FF1 0 06: Serial Port Output Data
FF5
addresses starting on pg. 1-88.
Groups
Related Programming:
SMDR Data to Serial Port (pg. 1-88)
FF6
Fault Alarm Data to Serial Port (pg. 1-88)
TRS/ARS
Programmed Data to Serial Port (pg. 1-89)
Bus Monitor Data to Serial Port (pg. 1-90)
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 1-80
FF1 0 05 0001 Hold (0-7) Hold
FF1 0 06 0001 Hold (0-2) Hold (pg. 1-88)
FF1 0 06 0002 Hold (0-2) Hold (pg. 1-88)
FF1 0 06 0003 Hold (0-2) Hold (pg. 1-89)
FF1 0 06 0005 Hold (0-2) Hold (pg. 1-90)
DBS 576 (USA) issued 05/20/98
0 = 7 bits
-- even parity
1 = 7 bits
-- odd parity
2 = 7 bits
-- even parity
3 = 7 bits
-- odd parity
4 = 8 bits
-- no parity
5 = 8 bits
-- no parity
6 = 8 bits
-- even parity
7 = 8 bits
-- odd parity
Section 400-Programming
$ "!
-- 2 stop bits
-- 2 stop bits
-- 1 stop bit
-- 1 stop bit
-- 2 stop bits
-- 1 stop bit (default)
-- 1 stop bit
-- 1 stop bit
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Advertisement
Table of Contents
