3.2 Assignment of VM (DPT) Extension Ports
1.
Go to the Configuration-Extension Port screen. Follow the procedure below for the extension port which
you want to assign as a VM port.
2.
Set the port's Connection to OUS.
3.
Select the attribute of DPT Property-Type to VM (DPT).
4.
Assign DPT Property-VM Unit No. and DPT Property-VM Port No.. Incoming calls will hunt starting at
the lowest VM Port number.
5.
Click Apply to save the changed data.
6.
Set the port's Connection to INS.
To determine how and when the PBX directs outside calls to the VPS, refer to 4.2 KX-TDE and KX-TDA Series
PBX Programming for DPT Integration in the Installation Manual.
Document Version 2.1 2008/04
3.2 Assignment of VM (DPT) Extension Ports
Getting Started
33