Incoming Call Distribution Group-Queuing Time Table [3-5-3] - Panasonic KX-TDA100 Features Manual

Hybrid ip-pbx

Hide thumbs Also See for KX-TDA100:

Table of Contents

Immediate, 1–6 Rings, No Ring

Programming Guide References

Feature Guide References

1.2.2.2 Group Call Distribution

Wrap-up Time

Specifies the length of time that must pass after completing a call before the member can accept another

10 × n (n=0–300) s

Programming Guide References

Feature Guide References

1.2.2.6 Log-in/Log-out

Incoming Call Distribution Group—Queuing Time Table [3-

A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are

handled. A maximum of 64 Queuing Time Tables can be programmed.

Queuing Sequence—Sequence 01–16

Specifies the command activated by the corresponding sequence.

None: Redirects the call to the next sequence

Overflow: Redirects the call to the overflow destination when there is no answer

Disconnect: Disconnects the line

Sequence 01–16: Redirects the call to a different sequence

OGM 01–64: Sends a certain OGM

Wait 5 × n (n=1–16) s: If preceded by an OGM, plays the Music on Hold for the specified period of time; if

not preceded by an OGM, sends a ringback tone for the specified period of time.

4.9 Groups [3]

Feature Guide

Show Quick Links

Table of Contents