Utility-T1 Line Trace; Utility-Isdn/Qsig Protocol Trace - Panasonic KX-TDA100 Features Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA100:
- Programming manual (912 pages) ,
- Pc programming manual (854 pages) ,
- Features manual (436 pages)
Table of Contents
Advertisement
To view signalling bit information
1.
From the Utility menu, select T1 Signalling Bit Monitor.
2.
From the Slot No drop-down list, select the target slot.
3.
From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
4.
Click Start.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
5.
Click Stop to end monitoring.
4.5.10 Utility—T1 Line Trace
Traces the sent and received signalling bits and dial numbers on the specified channel of the T1 line. This
utility is intended for use by dealers.
This option is only available at Installer level, and requires that the target T1 card be set to INS status.
To view T1 trace data
1.
From the Utility menu, select T1 Line Trace.
2.
From the Slot No drop-down list, select the target slot.
3.
From the CH No drop-down list, select the target channel.
4.
Click Start.
Trace information will be displayed. The information is automatically updated whenever the data being
monitored changes.
5.
Click Stop to end the trace.
6.
Select an option:
•
Click Capture to save the displayed trace information.
Information is saved as a text-format file.
•
Click Clear to erase the information.
4.5.11 Utility—ISDN/QSIG Protocol Trace
This utility collects protocol trace data from PRI or IP-GW cards, and displays it on the PC.
This option is only available at Installer level, and requires that the target PRI or IP-GW card be set to INS
status.
Protocol trace data is continually accumulated on ISDN and IP-GW cards, and 3 types of data can be
downloaded:
•
Real Time Trace: Pseudo-real-time data is collected through data polling at one-second intervals. The
displayed information is updated beginning when the Start button is clicked.
•
Accumulation Trace: Previously accumulated data is retrieved and displayed.
•
Error Accumulation Trace: Previously accumulated error data is retrieved and displayed. This trace
shows the data snapshot that is taken just before a card resets.
To view trace data
1.
From the Utility menu, select ISDN/QSIG Protocol Trace.
4.5 Utility
Feature Guide
327
- Quick Links:
- Incoming Co Line Call Features
Hide quick links:
Advertisement
Table of Contents
