Lan Configuration - Siemens Gigaset SE361 WLAN User Manual
Hide thumbs
Also See for Gigaset SE361 WLAN:
- Instruction manual (140 pages) ,
- Quick start manual (90 pages)
Table of Contents
Advertisement
Configuring the Advanced Settings
LAN configuration
You can use the LAN configuration to define an
and configure the DHCP server.
ì
Select Advanced Settings – Local Network.
Defining the private IP address for the Gigaset SE361 WLAN
On this screen you can change the device's
192.168.2.1. This is the Gigaset SE361 WLAN's
which the device can be reached on the local network. The address can be freely
assigned from the block of available addresses. The IP address under which the Gigaset
SE361 WLAN can be reached from outside is assigned by the Internet Service Provider.
ì
If you want to assign the Gigaset SE361 WLAN a different IP address, enter it in the
fields next to IP address.
ì
Select a number from the Subnet mask list.
We recommend using an address from a block that is reserved for private use. This
address block is 192.168.1.1 – 192.168.255.254.
Note:
New settings only take effect after rebooting the Gigaset SE361 WLAN. If neces-
sary, reconfigure the IP address on your PC (including one that is statically
assigned) so that it matches the new configuration.
54
IP address
for the Gigaset SE361 WLAN
IP
address. The default IP address is
Private IP
address. It is the address under
Hide quick links:
Advertisement
Table of Contents
