Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
SIMATIC NET SCALANCE W748-2 M12 EEC SIMATIC NET SCALANCE W748-1 RJ-45 SIMATIC NET SCALANCE W748-1 M12 in the version put into circulation by Siemens AG conform to the regulations of the following European directive: ● 99/5/EC Directive of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.
Page 10
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 11
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 12
Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/ww). Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
Page 13
● ANSI/ISA 12.12.01-2007 ● CSA C22.2 No. 213-M1987 Approved for use in Cl. 1, Div. 2, GP A, B, C, D T4 Cl. 1, Zone 2, GP IIC T4 Report no. E240480 Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 14
___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
Page 15
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 16
Users should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 17
Note for USA, Canada, Puerto Rico, Peru, Bahamas, Ecuador and Columbia When operating the SCALANCE W700 with DFS (Dynamic Frequence Selection), the IWLAN RCoax Cable 5 GHz (order number 6XV1875-2D) may not be used in the countries listed above.
Page 18
Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 19
The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Declaration of the conformity according to the technical regulations of the customs union (TR CU) National approvals The following table lists the countries in which the SCALANCE W700 product is approved. The diamond symbol (♦) identifies all countries for which there was no approval at the time these operating instructions were written.
SIMATIC NET SCALANCE W788C-2 RJ-45 SIMATIC NET SCALANCE W788C-2 M12 SIMATIC NET SCALANCE W788C-2 M12 EEC in the version put into circulation by Siemens AG conform to the regulations of the following European directive: ● 99/5/EC Directive of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.
Page 39
1 x RJ-45 EAPN-W2-RJ-I3 6GK5 786-2HC00-1AA0 W786-2 SFP 2 x SFP EAPN-W2-SFP-E3 6GK5 786-2FE00-1AA0 Type Certification ID Order number: W788C-2 RJ-45 RAPN-W2-RJ-E3 6GK 5788-2FC00-1AA0 W788C-2 M12 RAPN-W2-M12-E3 6GK5 788-2GD00-1AA0 W788C-2 M12 EEC RAPN-W2-M12-E3 6GK5788-2GD00-1TA0 Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 40
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 41
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 42
Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/ww). Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
Page 43
___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
Page 44
United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 45
(e.i.r.p.) is not more than that necessary for successful communication. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 46
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 47
Note for USA, Canada, Puerto Rico, Peru, Bahamas, Ecuador and Columbia When operating the SCALANCE W700 with DFS (Dynamic Frequence Selection), the IWLAN RCoax Cable 5 GHz (order number 6XV1875-2D) may not be used in the countries listed above.
Page 48
Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 49
R/1772/14 D090258 Marking for the customs union EAC (Eurasian Conformity) Customs union of Russia, Belarus and Kazakhstan Declaration of the conformity according to the technical regulations of the customs union (TR CU) Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Country Mode IEEE 802.11 standard and the TPC and / or DFS functionality, where required Channel Frequency PWR (EIRP) Maximum permitted effective isotropic radiated power Permitted use indoors and / or outdoors Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
SIMATIC NET SCALANCE W774-1 RJ-45 SIMATIC NET SCALANCE W774-1 M12 EEC SIMATIC NET SCALANCE W734-1 RJ-45 in the version put into circulation by Siemens AG conform to the regulations of the following European directives: ● 99/5/EC Directive of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.
Page 72
Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/ww). Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
Page 73
___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
Page 74
United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 75
(e.i.r.p.) is not more than that necessary for successful communication. Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 76
Devices of the SCALANCE W770/W730 series are approved in Argentina under the following certification numbers: Certification ID Certification number MSN-W1-RJ-E2 CNC: C-13164 MSN-W1-M12-E2 CNC: C-13163 Approval for Brazil Devices of the SCALANCE W760/W720 series are approved in Brazil under the following certification numbers: Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
Page 77
Railway approval for the SCALANCE W774-1 M12 EEC The SCALANCE W774-1 M12 EEC device meets the requirements of the railway standard EN 50155:2007 "Railway Applications - Electronic equipment used on rolling stock". Approvals SCALANCE W700 802.11n Reference Manual, 10/2015, C79000-G8976-C392-03...
3.2 National approvals National approvals The following table lists the countries in which the SCALANCE W700 product is approved. The diamond symbol (♦) identifies all countries for which there was no approval at the time these operating instructions were written.