Operating Instructions Vacuum Cleaner MC-E464, MC-E468, MC-E469 Shop Panasonic For Accessories and Consumables visit our web site at www.panasonic.co.uk (for customers in the UK only) Panasonic We would recommend that you read these Operating Instructions before attempting to operate the unit and that you note the Important Safety Instructions.
• Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. • This appliance should be serviced by an authorised Panasonic Service Centre, and only genuine Panasonic spare parts should be used.
HOW TO ASSEMBLE / OPERATE YOUR CLEANER A) HANDLE ASSEMBLY Upper cord hook Hose clip Lower cord hook/ Carrying handle 1) Insert the base of the handle 2) Set the hose around the hose 3) Turn the upper cord hook in into the top of the body of the clip.
D) VARIABLE POWER CONTROL (MC-E469 only) These vacuum cleaners incorporate a variable power control to select the most suitable power required for your cleaning needs. MC-E452 MC-E457 MIN: To clean curtains and soft furnishing’s MAX: To clean with high suction etc., with tool attached.
To ensure correct operation of the vacuum cleaner on hard floors, slide the “BEATER BAR” switch to the “STOP” position. IMPORTANT: On model MC-E464, notice that it is not attached with Beater bar switch, so that to prevent damage tiled floors, Linoleum, etc., DO NOT leave the beater bar rotating in the same place for to long.
While using the accessories, hold the handle with • one hand to avoid pulling the cleaner over. On model MC-E464, to prevent damage to carpeted • floors, Linoleum, etc., tilt the cleaner back so that the cleaning head is raised off the floor.
IMPORTANT: Dust bags should be changed regularly for the maximum efficiency of the filters and prolonged motor efficiency. We recommend the use of genuine Panasonic bags Type U-20E only. FILTER CARE Fig. 1 Fig. 2 Central Filter (Fig.
BLOCKAGES If your cleaner stops picking up dust, or the dust bag check indicator shows "Full" while the dust bag is still empty, a blockage may have occurred. Remove the hose from the suction inlet, push the smalls clips inwards, turn the hose right and pull it upwards (Fig.
Before replacing any part DISCONNECT THE CLEANER FROM THE MAINS SUPPLY. We always recommend you use genuine Panasonic replacement parts only. If you have any query, contact your local Panasonic dealer / service agent. To replace any of the following parts, place the vacuum cleaner in the horizontal position by using the pedal.
Panasonic Service Centre to be repaired. NOTE: If the flexible power cord becomes damaged, it must be repaired by Panasonic, or an Authorised Service Centre or a qualified person in order to avoid any hazard.
Customer Care Centre on 0870 900 9043 Mon - Fri 9:00 am - 5:30 pm (except public holidays). • Or go online through our Internet Accessory ordering application at www.panasonic.co.uk. • Most major credit and debit cards accepted. • All enquiries, transactions and distribution facilities are provided directly by Panasonic UK Ltd. • It couldn’t be simpler!
Page 14
REMINDER FOR CUSTOMER The model and serial number of this product may Model Number: .............. be found on the name plate located at the back of Serial Number: ............... your cleaner. You should note the model and serial Date Purchased: ............number in the spaces provided and retain this book Where Purchased: ............