MC-E4061-00 1.2. Wire Management Drawing NOTE: For general servicing, it is necessary to eliminate pinching of any wire during reassembly. After servicing any electrical component or electrical enclosure, the unit should be reassembled and checked for dielectric breakdown or current leakage.
MC-E4061-00 2.5. Packing Materials 2.5.1. Exploded View 2.5.2. Parts List (Packing Material) Ref. No Part No. Part Name & Description Quantity Remarks AC61ZDDDZ0E0 Carton Box Includes Items A thru E...
MC-E4061-00 3 REPLACEMENT INSTRUCTIONS 3.1. Nozzle cover 3.2. Beater Bar Assembly Replacement 3.1.1. Removal 1. Release the nozzle cover by rotating the nozzle cover retainers to the UNLOCK position. 2. Rotate upward on the nozzle cover to remove it from the nozzle base.
MC-E4061-00 3.5. Handle Release Assembly Replacement 3.5.1. Removal 1. Remove handle from unit as described above. 2. Separate the handle assembly by removing (14) fourteen screws as illustrated in the Exploded View (Handle Assembly) 3. Remove handle release button and spring.
MC-E4061-00 3.8. Motor Protector Replacement 3.8.1. Removal 1. Remove the dust cover. 3.6.2. Installation 1. Replace damaged lead. carefully routing mains lead as illustrated. 2. Reinstall handle as outlined in the handle installation section. 2. Remove the motor protector cover, by releasing one of the 3.
Page 7
MC-E4061-00 3.9. Motor Assembly Replacement 3.9.1. Removal 1. Remove the dust cover by removing the eight (8) screws. 2. Remove the lower plate, beater bar assembly, belt, the plastic shaft and the nozzle housing as instructed in the respective removal sections.