Inspection/Storage - Toshiba G8000 SERIES Installation And Operation Manual

480/208 v 100/150 kw

Hide thumbs Also See for G8000 SERIES:

Table of Contents

4.4

Inspection/Storage

Inspection

Upon receipt of the UpS, an inspection for shipping damage should be performed. Use caution when

removing the unit from the pallet. refer to labels or documentation attached to packing material.

Unpacking

Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipping,

keep all original crating and packing materials for return to the shipping agent.

NOTE: The factory warranty does not apply to damage incurred during shipping!

Ensure that the rated capacity and the model number specified on the nameplate conform to the order

specifications.

Storage

During periods of non-use, the following guidelines are recommended for storage.

Storage Preparation

•

place the mCCb switch in the "oFF" position.

Storage Conditions

• For best results, store the UpS in the original shipping container and place on a wood

or metal pallet

• Storage temperature range: -4 to 95 °F (-20 to 35 °C)

• maximum storage time for the UpS between powered operation cycles is three years.

If the UPS has been stored for a period exceeding 36 months, contact your factory

authorized represnetative of guidance in starting the unit.

Avoid the following storage locations:

• locations that are subject to extreme temperature changes or high humidity

• locations that are subject to high levels of dust or metal particles

• locations that are subject to excessive vibration

• Inclined floor surfaces

G8000 Series with Isolated output Installation and operation manual

Table of Contents