Table of Contents
Advertisement
Chapter 2: Installation
• System
LED
PWR
Green
• Per 10/100Base-TX, PoE interfaces (Port-1 to Port-24)
LED
LNK/ACT
Green
PoE In Use
Orange
• Per 10/100/1000Base-T port/SFP interfaces
LED
LNK/ACT 1000
Green
LNK/ACT 100
Green
NOTE:
1. Press the RESET button once. The Switch will reboot automatically.
2. Press the RESET button for about 10 seconds. The Switch will revert to the factory
default mode; the entire configuration will be erased.
3. The 2 Gigabit TP/SFP combo ports are shared with port 25/26 of GE-DS-242-PoE.
Both of them can operate at the same time.
14
Color
Function
Lit: indicates there is power to the Switch
Color
Function
Lit: indicates the link through that port is successfully
established
Blink: indicares the Switch is actively sending or receiving data
over that port
Lit: indicates the port is providing 48VDC in-line power
Off: indicates the connected device is not a PoE Powered
Device (PD)
Color
Function
Lit: indicates the port is operating at 1000Mbps
Off: indicates the port is operating at 10Mbps or 100Mbps
Blink: indicates the Switch is actively sending or receiving data
over that port
Lit: indicates the port is operating at 100Mbps
Off: indicates the port is operating at 10Mbps or 1000Mbps
Blink: indicates the Switch is actively sending or receiving data
over that port
GE-DS-242-PoE Managed Ethernet Switch User Manual
Advertisement
Table of Contents
