Table of Contents
Advertisement
• PD Classifications
A PD may be classified by the PSE based on the classification information provided by
the PD. The intent of PD classification is to provide information about the maximum
power required by the PD during operation. Class 0 is the default for PDs. However, to
improve power management at the PSE, the PD may opt to provide a signature for
Class 1 to 3.
The PD is classified based on power. The classification of the PD is the maximum
power that the PD will draw across all input voltages and operational modes.
A PD shall return Class 0 to 3 in accordance with the maximum power draw as
specified by Table 4-3.
Table 4-13-1: Device class
Class
Usage
0
Default
1
Optional
2
Optional
3
Optional
4
Not Allowed
NOTE:
Class 4 is defined but is reserved for future use. A Class 4 signature cannot be
provided by a compliant PD.
GE-DS-242-PoE Managed Ethernet Switch User Manual
Range of maximum power used by the PD
0.44 to 12.95 Watts
0.44 to 3.84 Watts
3.84 to 6.49 Watts
6.49 to 12.95 Watts
Reserved for Future Use
Chapter 4: Web-Based Management
119
Advertisement
Table of Contents
