Toshiba e-STUDIO453 Service Manual page 188
Hide thumbs
Also See for e-STUDIO453:
- Service handbook (764 pages) ,
- Operator's manual (362 pages) ,
- Printing manual (356 pages)
Table of Contents
Advertisement
[D] Registration roller
(1) Take off the bypass unit (
(2) Take off ADU (
(3) Take off the front cover (
(4) Take off the cleaner unit (
[A]).
(5) Take off the rear cover (
(6) Take off the right rear cover (
2.5.1 [G]).
(7) Take off the SYS board cover (
2.5.2 [C]).
(8) Take off the developer cooling fan-2
(
Chapter 11.6 [I]).
(9) Disconnect 1 connector of the registration
9
clutch.
(10) Loosen 1 setscrew and take off the registra-
tion clutch.
Note:
Match the protruding portion of the clutch
with the position shown in the drawing for
assembling.
(11) Disconnect 1 connector of the fan motor.
(12) Remove 1 screw and take off the developer
unit cooling fan-1 unit.
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
Chapter 9.4 (A-1)).
Chapter 14.5 [A]).
Chapter 2.5.1 [A]).
Chapter 11.6
Chapter 2.5.1 [H]).
Chapter
Chapter
Setscrew
Fig. 9-448
Developer unit
cooling fan-1 unit
Fig. 9-449
9 - 22
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
05/11
Connector
Connector
Screw
Advertisement
Table of Contents
