Call On Exclusive Hold - Intercom - Panasonic EASA-PHONE KX-T30810 Installation Manual
Electronic modular switching system
Hide thumbs
Also See for EASA-PHONE KX-T30810:
- Installation manual (118 pages) ,
- User manual (24 pages) ,
- Installation and operation manual (16 pages)
Table of Contents
Advertisement
To place a call
on exclusive hold:
To retrieve
PRESS
"HOLD"
PRESS
AGAIN
PRESS
"ICM"
s
The-intercom
call on exclusive hold can not be
released by any extension other than the phone
which has placed the call on hold.
You are in conversation
with an internal
party.
.
Press the HOLD
button.
The indicator on the ICM button will flash
slowly.
The confirmation
tone of 2 beeps will be
heard.
3. Press the HOLD
button, again.
The indicator will flash in groups of 2.
.
To retrieve, press the ICM
button.
The indicator on the ICM button will return
to a steady green.
When a call is on hold for more than 30
minutes after a hold time reminder sounds, the
call will be terminated
automatically.
A hold time reminder is sounded through the
built-in speaker
of
the extension.
Calls on hold will be recalled either after
30 seconds,
I minute,
1 minute
and
30 seconds or 2 minutes,
once handset is
replaced
(or
the
SP-PHONE
button
is
pressed).
If
hold recall time set is set to
"DISABLE",
will not be recalled. Refer to
"Hold
Recall Time Set" on page 2-34.
The hold time reminder is activated, even
if
the
hold recall time set is programmed
to "DIS-
ABLE".
When lifting the handset (or be pressing the
SP-PHONE
button):
before recalling...the
dial tone will be heard
with the call on hold.
You
may
dial
another
phone number.
while recalling.. .the call on hold
will be
released and entered into the
conversation
mode.
An Intercom
hold can be activated on one
extension only.
3-16
Hide quick links:
Advertisement
Table of Contents
