Dialing - Panasonic EASA-PHONE KX-T30810 Installation Manual
Electronic modular switching system
Hide thumbs
Also See for EASA-PHONE KX-T30810:
- Installation manual (118 pages) ,
- User manual (24 pages) ,
- Installation and operation manual (16 pages)
Table of Contents
Advertisement
There are 12 memory locations for automatic
dialing available. Up to 32 digits can be stored
into each of the 12 memory locations. Pushing
the "*",
"#",
I'->*, "FLASH"
or "PAUSE"
utton counts as I digit.
For your convenience, program prilzte phone
numbers into the KX-T30830,
KX-T30820
or
KX- T308.50.
ndset is in the cradle and the
SP-PHONE
button
is OFF.
. Set the MEMORY
switch to "PROGRAM".
"ONE
TOUCH
DIAL"
will be displayed.
2. Press a programmable
feature button.
The LCD will show "MOI: NOT STORED"
when nothing is stored in the programmable
feature button
"01".
When automatic line access number 9 and the
phone number 123-4.56-7890 hus been stored,
"MOl:
-123-456-7890"
will be displayed.
3. Enter the line
access number.
9: automatic
line access number
81: line access number
of CO I
82: line access number
of CO 2
83: line access number
of CO 3
. Enter the phone number.
You may
enter punctuations
dllring
a
phone number.
The SNR button is used as the 'i-" button.
To erase a wrong enter, press the CLEAR
button.
The TRANSFER
button
is used as the
CLEAR
button.
5. Press the MEMORY
button.
The MEMORY
indicator
will be lit.
6. Repeat steps 2 to 5, to program
on other
programmable
,feature button.
1. After programming
~11 the numbers,
return
the MEMORY
switch to the "SET" position.
The MEMORY
indicator
will go out.
1. Lift the handset or press the SP-PHONE
button.
2. Press a progrummable
featrlre button.
YOLL
may press
the CO buttori
to select the
CO line directly after ltfting the handset ot
pressing
the
SP-PHONE
button.
more the 13 digits of a phone number, use
the " 0 ", or " a"
button for scrolling the
display.
The dialed phone number will be displayed on
the LCD
of the KX-T30830.
Continuous
lise of the programmable
,featur-e
button
is possible.
(ex. press 01-02)
The combinations
of speed dialing, one-touch
dialing and manual
dialing is possible.
The line access number
(9, 81, 82 or 83)
should be stored.
Continuous
use of one touch dialing is possi-
ble.
Example:
WI
WI
In this case, programmable
feature button
"02" should not include the line access
number.
When
dialing,
the pause
is automatically
entered after line access number (9, 81, 82 or
83).
ures that can be accessed by using the
ng button also can be programmed
into
memory.
Refer
to "One
Touch Access for
System
Features" page 3-25.
Examples:
Automatic
line access number
9 and phone
number 123-4567 into the programmable
fea-
ture "01" button.
Programming
[Set to "PROGRAM"]
[Ol] [9]
1123-45671 [MEMORY]
[Set to "SET"]
Dialing
[LIFT HANDSET]
[Ol]
You may press the CO button to select the CO
line directly after liftiq
the handset.
3-5
Hide quick links:
Advertisement
Table of Contents
