Signing on
^ With the hob switched off, touch the hob ON/OFF sensor s
and the safety lock sensor $ at the same time until the
indicator for the safety lock flashes.
After the programming mode has been called up, P
(Programme), S (Status) and numbers will appear in the
cooking zone displays. These show the current settings.
^ On hobs with 4 or more cooking zones touch the front left
+ sensor and on hobs with 3 cooking zones touch the left
+ sensor until the following shows in the display
- 0. (hobs with 9[17] power levels) or
- 10 (hobs with 12[23] power levels).
^ On hobs with 4 or more cooking zones touch the front
right + sensor and on hobs with 3 cooking zones touch
the rear right + sensor until a 2 appears in the display.
The signing on process will start and a "rotating" § will appear
in the display. The signing on process will take a few minutes.
As soon as it has been completed successfully, the Status 2
will appear in the display.
^ Touch the hob ON/OFF sensor s until the displays go out
to save the setting.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
Signing on/off KM 59** hobs
27