Table of Contents
Advertisement
Repairs to electrical appliances
should only be carried out by a suit-
ably qualified and competent person
in accordance with local and na-
tional safety regulations. Unauthor-
ised repairs could be dangerous.
The following can be corrected without
contacting the Miele Service Depart-
ment:
^ Check to see whether any pieces of
furniture next to the appliance are vi-
brating whilst the appliance is in op-
eration.
Switch the appliance off then:
^ Check whether the appliance is
aligned correctly.
^ Check whether all parts at the rear of
the appliance are free from hin-
drance. Remove any hindrance.
^ Check that the cable clips have been
unclipped from the back of the appli-
ance before installation. They could
vibrate when the appliance is operat-
ing.
^ Are all removable parts securely lo-
cated in the appliance?
Remember that the noise of the com-
pressor and the coolant circulating in
the system is unavoidable.
18
^ Check that the appliance is switched
on. The temperature display must be
lit up.
^ Check that the plug is correctly in-
serted in the socket.
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has contact the Miele Ser-
vice Department
^ Check whether ventilation gaps have
been covered over or become too
dusty.
^ Check whether, the metal grille (heat
exchanger) at the rear of the appli-
ance has become too dusty.
^ The appliance door has been
opened too frequently.
^ Check that the door closes properly.
^ Check whether the door has been left
open for longer than 3 minutes.
If this is not the case, then the tempera-
ture has risen higher than the tempera-
ture set due to:
^ the door being opened too often.
^ a blocked ventilation gap.
^ a lengthy interruption to the power
supply.
Hide quick links:
Advertisement
Table of Contents
