Advertisement
The plate warmer must be fitted
above a fixed interim shelf in the
housing unit to ensure that the hous-
ing unit can support the weight of it
and of any other appliance installed
in combination with it.
When fitted in combination with an-
other appliance, the plate warmer
must always be fitted as the lower of
the two appliances.
As the combination appliance is
placed directly on top of the plate
warmer once it is built-in an interim
shelf is not necessary in between
the two appliances.
^ Disconnect the fused connection
point from the mains electricity
supply.
^ Then connect the plate warmer mains
cable to the fused connection point.
^ Push the appliance back into the
housing unit as far as the vapour strip
and align it.
Ensure that the housing unit is
aligned at a right angle.
22
^ Open the plate warmer drawer and
use two screws to secure the plate
warmer to the side walls of the hous-
ing unit.
Three adhesive metal strips are sup-
plied with the appliance.
The metal strips must be stuck to the
plate warmer in such a way that they
seal off the space between the plate
warmer and the housing unit. The
pocket of air created acts as an insula-
tor and so prevents heat loss.
Advertisement
