Advertisement
All electrical work should be under-
taken by a competent person in
strict accordance with national and
local safety regulations.
The voltage and rated load are given
on the data plate located beside the
control panel. Please ensure that these
match the household mains supply.
Please quote these data, and the model
and serial number when contacting the
Miele Service dept.
Connection of this appliance should be
made via a suitable isolator which com-
plies with national and local regulations,
and which is accessible after the appli-
ance has been built in.
Test marks . . . . . . . . . . Electrical safety
. . . . . . . . . . . . . . . . . . . . . . C-Tick Mark
Electrically suppressed
according to. . . . . . . . . . . AS/NZS 1044
18
The Built-in plate warmer is supplied
with a mains cable for connection to an
a.c. single phase 240 V, 50 Hz electric-
ity supply.
The plug rating is 10 A.
The Built-in plate warmer is supplied
with a mains cable for connection to an
a.c. single phase 230 V, 50 Hz electric-
ity supply.
The plug rating is 10 A.
Advertisement
