Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
■ [Send Ping Command] Screen
•
CHAP User Name
When "ON" is selected for "CHAP", enter the user name to access the target port.
Make sure to set the user name and password in pairs.
The following input conditions apply:
-
1 - 255 alphanumeric characters and symbols
-
Space
•
New Password
When "ON" is selected for "CHAP", enter the password to access the target port. Make
sure to set the user name and password in pairs.
The following input conditions apply:
-
12 - 100 alphanumeric characters and symbols
-
Space
•
Confirm new Password
Specify the same password as that entered in the New Password field.
The following input conditions apply:
-
12 - 100 alphanumeric characters and symbols
-
Space
Checks the connection status between the target port and the destination device.
•
IP Address
Enter the IP address of the device that is used to check the connection status of the
target port.
The following input conditions apply:
-
1 - 3 numeric characters
-
First text box: "1" - "255"
-
Other text box: "0" - "255"
•
Send Number
Enter the transmission count of the ping command between 1 and 10.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
367
P2X0-1090-02ENZ0