Adjusting The Screen - Pioneer PDP-502MX Manual
Plasma display monitor
Hide thumbs
Also See for PDP-502MX:
- Service manual (160 pages) ,
- Operating instructions manual (44 pages) ,
- Manual (11 pages)
Table of Contents
Advertisement
3) Adjusting the SCREEN
The items that can be adjusted here are H.POSITION, V.POSITION, V SIZE, CLK FREQ and CLK PHASE.
(NOTE) With this unit, H. SIZE cannot be adjusted.
1 Before entering the integrator mode, switch the unit to the
specific input (one of INPUTs 1 to 4) in which adjustments
will be made (refer to section 5.4.1, "About the integrator
mode").
The ID number of the unit of items will be indicated in the
upper right corner of the screen, where "– –" is displayed
in the illustration.
Select SCREEN.
2 Select the desired adjustment item.
Select DEFAULT on Screen 2 to return all of the SCREEN
adjustment values to their factory preset values (center
values).
Push the 2 button on the remote control or operating panel
on the main unit to return to screen 1.
3 Make the necessary adjustments.
(NOTE) V.SIZE can only be adjusted when video signals
are being received. CLK FREQ and CLK PHASE can
only be adjusted when PC signals are being
received.
(NOTE) Three SCREEN parameter settings are required for
each display screen size when displaying 1280 x
1024 / 60 Hz input. (1 For the 4:3 TYPE screen
size, 2 For the FULL TYPE screen size, 3 For the
ZOOM screen size)
Adjustments can be made using the 2 and 3 buttons (or
the 5 and ∞ buttons for V.POSITION and V.SIZE) on the
remote control or the operating panel of the main unit.
Values set and adjusted for H.POSITION, V.POSITION, V.SIZE, and CLK FRQ. serve as median values when
adjustments are made in the menu mode.
CLK PHASE uses the same data as in menu mode.
Press the SET button to return to Screen 2.
<Adjustable Range> 0 to 255 (median 128) for H.POSITION and V.POSITION
<Adjusting Order>
64 to 191 (median 128) for V.SIZE, CLK FREQ
0 to 16 (median 8) for CLK PHASE
For the sake of efficiency, make adjustments in the following order:
V.POSITION = H.POSITION = CLK FREQ = H.POSITION = CLK PHASE
Screen 1
MENU
PICTURE
H. POSI.
WHITE BAL.
V. POSI.
3SCREEN
]
SIDE MASK
V. SIZE
OPTION 1
CLK FRQ
OPTION 2
CLK PHS
DEFAULT
SUB VOLUME
ALL DEFAULT
Screen 2
MENU
3H. POSI.
PICTURE
WHITE BAL.
V. POSI.
]
SCREEN
SIDE MASK
V. SIZE
OPTION 1
CLK FRQ
CLK PHS
OPTION 2
SUB VOLUME
DEFAULT
ALL DEFAULT
Screen 3
SCREEN
]
128
H.POSITION
Integrator Mode
– –
: 128
: 128
: – – –
: 128
:
8
– –
: 128
: 128
: – – –
: 128
:
8
– –
113
Advertisement
Chapters
Table of Contents
