Hitachi XP P9500 User Manual page 209

Command suite for linux(r)

Hide thumbs Also See for XP P9500:

Table of Contents

When ELILO is the boot loader

Specify label for default.

Shut down the host.

Execute the following command to shut down the host:

# shutdown -h now

Change the configuration from a multi-path configuration to a single-path

configuration.

Start the host.

Execute the mount command to check that the SCSI device is mounted

The following shows an execution example for when GRUB is used as the

boot loader:

/dev/sda1 on /boot type ext3 (rw)

Check the underlined section.

Update the information about the volume group.

Execute the following command to update the information about the

volume group.

Reading all physical volumes.

Found volume group "VolGroup00" using metadata type lvm2

Check the relationship between the volume group and HDLM devices.

Execute the following command to make sure that the physical volumes

that make up the volume group are not HDLM devices.

Creating an HDLM Environment

Hitachi Dynamic Link Manager User Guide (for Linux(R))

This may take a while...

Troubleshooting

Dynamic link manager