Hitachi XP P9500 User Manual page 181
Command suite for linux(r)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (422 pages) ,
- User manual (450 pages)
Table of Contents
Advertisement
The following shows an example of executing the command:
# /sbin/dracut /boot/initramfs-hdlm-2.6.32-71.el6.i686.img
`uname -r`
For OSs other than the above:
¢
Execute the utility for supporting a boot disk (dlmmkinitrd).
For details on the dlmmkinitrd utility, see
Supporting a Boot Disk on page
20
Back up the /etc/fstab file.
.
21
Edit the /etc/fstab file.
.
Change the mount points for the following HDLM management-target
devices from the SCSI device to the HDLM device:
When ELILO is used as the boot loader:
¢
Root directory (/), /boot/efi, /tmp, /usr, /var, swap
When GRUB is used as the boot loader:
¢
Root directory (/), /boot, /tmp, /usr, /var, swap
When LILO is used as the boot loader:
¢
Root directory (/), /tmp, /usr, /var, swap
Comment out the existing SCSI device specification by placing a hash
mark (#) at the beginning of each line, and then add the HDLM device
specification as shown below, based on the correspondence between the
SCSI device and the HDLM device as checked in step 18.
#LABEL=/
#/dev/sda2
/dev/sddlmaa2
#LABEL=/tmp
#/dev/sda4
/dev/sddlmaa4
22
Back up the boot loader configuration file.
.
23
Copy the configuration contained in the boot loader configuration file,
.
which was used for startup from the SCSI device in step 14.
24
Change the name of the configuration contained in the boot loader
.
configuration file.
Change the name of the configuration copied in step 23. Choose a name
that indicates use for an HDLM device specification.
When GRUB is used as the boot loader:
¢
Change the underlined text as follows:
Before:
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
7-31.
:
:
/
ext2
defaults
/
ext2
defaults
/
ext2
defaults
:
:
/tmp
ext2
defaults
/tmp
ext2
defaults
/tmp
ext2
defaults
:
:
dlmmkinitrd Utility for
1 1
1 1
1 1
1 2
1 2
1 2
3-113
Advertisement
Table of Contents
Troubleshooting
