Explanation Of Indicators - Sony UP-DR80MD Instructions For Use Manual
Digital color printer
Hide thumbs
Also See for UP-DR80MD:
- Instructions for use manual (31 pages) ,
- Quick manual (17 pages) ,
- Quick reference manual (4 pages)
Table of Contents
Advertisement
Explanation of Indicators
The meanings of the indicators on the printer when they
are on or flashing are described below.
Indicator
Status
Possible causes and remedies
1 ON/
On
The printer is turned on.
STANDBY
Flashing
The printer is entering the standby
(green)
state.
CLEANING
On
The cleaning ribbon is loaded.
tRemove the cleaning ribbon.
(orange)
Flashing
Cleaning in progress.
RIBBON/
On
One of the following causes.
PAPER
• A paper roll has not been loaded.
(orange)
t Load a paper roll (page 14).
• An ink ribbon has not been loaded.
tLoad an ink ribbon (page 13).
• The ink ribbon has been used up.
tLoad a new ink ribbon and paper
• A ribbon error has occurred.
tCheck that an ink ribbon has
• The paper roll is the wrong size.
tSet the paper holder selector
1)
ALARM
On
One of the following causes.
(orange)
• The media tray is not closed.
tClose the media tray properly.
• A paper jam has occurred in the
printer.
tRemove the jammed paper
• The paper outlet is full of printouts.
tRemove the printouts that are
RIBBON/
On
One of the following causes.
PAPER,
• The paper roll has run out.
1)
tLoad a new ink ribbon and paper
ALARM
• A paper feed error has occurred.
tCheck the ink ribbon and paper
• A paper eject error has occurred.
tCheck the ink ribbon and paper
PRINT
On
Printing is in progress.
(green)
Flashing
Image data is being received.
Flashing
The printer is waiting until the thermal
slowly
head reaches a temperature at which
printing is possible. Once that
temperature is reached, the PRINT
indicator will light.
roll (page 16).
been loaded properly.
properly (page 13).
(page 24).
blocking the paper outlet.
roll (page 16).
roll.
roll.
Indicator
Status
Possible causes and remedies
All of
On
• The printer is initializing.
tAfter pressing the 1 ON/
CLEANING,
RIBBON/
PAPER,
ALARM,
and PRINT
• The media tray was opened during
printing.
tPress the 1 ON/STANDBY
• A serious failure has occurred.
tPress the 1 ON/STANDBY
1)
During continuous printing, the PRINT indicator lights at the
same time if there are still images remaining.
STANDBY switch to turn on the
printer, this indicator remains lit
while the printer is initializing.
Wait until initialization is
complete.
switch to enter the standby state,
press the 1 ON/STANDBY
switch again to turn on the
power, and then check the ink
ribbon and paper roll.
switch to enter the standby state,
and then press the 1 ON/
STANDBY switch again to turn
on the power. If the printer is still
unable to recover from the
failure, press the 1 ON/
STANDBY switch to enter the
standby state and then
disconnect the power cord and
contact your dealer.
Explanation of Indicators
23
Hide quick links:
Advertisement
Table of Contents
