Software Required
The management utility of integrated SAS hardware RAID can be found in the
EasyBUILD.
Software
RAID Web Console
2
Intel PROSet Utility
Configuring integrated SAS hardware RAID
Please refer to the Appendix A. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. The Windows Server 2008 can recognize integrated SAS hardware RAID.
Please replace the driver with the one provided by EasyBUILD. If you do not
have the optional internal USB floppy drive, you need an external USB floppy
drive or USB Flash drive to load driver during the OS installation.
Please make a driver diskette from the EasyBUILD first before the
1.
installation.
Click on "Load Driver" when "Where do you want to install Windows"
2.
message displayed.
Select "Intel(R) RAID Controller SROMBSAS18E (A:\oemsetup.inf)" as
3.
target driver
After loading the RAID driver from diskette, you could click "Drive
4.
options" to partition the drive.
Follow the normal procedure to finish the installation.
5.
After the installation completes, you would see the following devices
6.
with yellow mark in Device Manager.
13
Version
2.63
EasyBUILD 8.0 build 200 (or later)
13.0.44.0
EasyBUILD 8.0 build 200 (or later)
Altos R720 Installation Configuration Guide
EasyBUILD Version