HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 126
External print server/internet connector for usb
Hide thumbs
Also See for Jetdirect 310x - Print Server For Fast Ethernet:
- Administrator's manual (303 pages) ,
- User manual (142 pages) ,
- White paper (20 pages)
Table of Contents
Advertisement
1C
PRINT SERVER
NO DEFINED
1D
UNABLE TO
CONNECT TO
SERVER
1E
FAIL RESERVING
PRINTER NUM
1F
ERR
NEGOTIATING
BUFFER SIZE
20
UNABLE TO
LOGIN
21
UNABLE TO SET
PASSWORD
22
UNABLE TO
CONNECT TO
SERVER
The file server does not have a print server object that corresponds to
the specified NetWare node name. Use printer installation software, a
NetWare utility (such as PCONSOLE), or another tool to create the
print server object.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
Remote Printer mode error. The print server was unable to establish an
SPX connection with the NetWare print server. Make sure that the
NetWare print server is running and that all cables and routers are
functioning correctly.
The SPX connection to the print server was lost when the print server
attempted to reserve the printer number. This indicates a possible
network problem, or a problem with the print server. Make sure all
cables and routers are functioning correctly. Try restarting the print
server.
A failure was detected when selecting the buffer size to be used when
reading print data from the file server. This may indicate a network
problem.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
A failure was detected when the print server tried to log onto the file
server. This could be caused by the print server object not existing on
the file server, or by a security check that prevents the print server from
logging in. Make sure the file server name and print server object name
are correct. Use PCONSOLE to erase the password for the print server
object. Create a new print server object.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
A failure was detected when the print server tried to set the password
for the print server object. (Whenever the print server is able to log in
without a password, it sets the password automatically.) This indicates a
networking or security problem. Create a new print server object.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
Queue Server mode error. The print server could not establish an NCP
connection to the file server. Make sure that the correct file servers are
connected.
Note: When the print server is configured for multiple file servers, the
error is only displayed on the configuration page if none of the file
servers was successfully connected.
- Quick Links:
- Installing the Print Server
Hide quick links:
Advertisement
Table of Contents
