HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 102
External print server/internet connector for usb
Hide thumbs
Also See for Jetdirect 310x - Print Server For Fast Ethernet:
- Administrator's manual (303 pages) ,
- User manual (142 pages) ,
- White paper (20 pages)
Table of Contents
Advertisement
Add Port
4.
Click
LPR Port
5.
Select
Name or address of server providing lpd
6.
In the
IP address or name of the HP Jetdirect print server.
Note: NT clients can enter the IP address or name
of the NT server that is configured for LPD
printing.
Name of printer or print queue on that server
7.
In the
enter the queue name in lower case (raw, text, auto, binps, or
the user-defined queue). Then click
of queues
above.)
8.
Ensure that the port is selected in the
available ports, then click
9.
Follow the remaining instructions on the screen to complete the
configuration.
Installation note: If the LPD printer on the NT server is shared,
Windows clients can connect to the printer on the NT server using the
Windows Add Printer utility in the Printers folder.
C. Verifying the configuration
From within Windows NT, print a file from any application. If the file
prints correctly, the configuration was successful. If the print job is
not successful, try printing directly from DOS using the following
syntax:
lpr -S<ipaddress> -P<queuename>
filename
where:
<ipaddress> is the IP address of the print server,
<queuename> is the name raw or text,
<filename> is the file you wish to print.
If the file prints correctly, the configuration was successful. If the file
does not print, or prints incorrectly, see Troubleshooting.
Back to start of NT 4.0 setup procedure
Back to start of entire LPD setup
.
New Port
, and click
[Next]
.
.
box, enter the
[OK]
. (See the
description
Add Printer
list of the
box,
- Quick Links:
- Installing the Print Server
Hide quick links:
Advertisement
Table of Contents
