Contents OREWORD Safety Instructions ......................... 5 Disc Type and Characteristics....................6 DVD-VCR O VERVIEWS Front View of the DVD-VCR ....................7 Rear View of the DVD-VCR ....................7 Infrared Remote Control ......................8 Display Indicators ........................9 Accessories ........................... 9 DVD-VCR ONNECTING Deciding How to Connect DVD-VCR ..................
Page 3
Contents Recording a Programme Immediately ..................30 Recording a Programme with Automatic Stop ............... 31 Using the ShowView ......................32 Modifying ShowView Programming..................33 Using the Timer Programming Feature .................. 34 Checking a Preset Recording....................35 Cancelling a Preset Recording ....................35 LAYING Playing a Cassette .........................
Page 4
Contents (cont.) A - A PPENDIX DVANCED ONNECTIONS Setting the Delay Time....................... 67 About Speaker Setup ........................ 68 Sound Mode Function........................ 70 Listening to the Radio ........................ 71 Presetting Stations ........................72 OLVING ROBLEMS Technical Specifications......................73 Problems and Solutions (VCR) ....................74 Troubleshooting Guide (DVD).....................
Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. 40°C 5°C Do NOT expose the DVD-VCR Do NOT expose the DVD-VCR Do NOT expose the DVD-VCR to extreme temperature condi- to direct sunlight.
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos : Max. Disc Types Recording Disc Size Playing Characteristics (Logos) Types Time Single-sided • DVD contains excellent sound 240 min. 12 Cm and video due to Dolby Digital Double-sided...
Infrared Remote Control STANDBY/ON SHUTTLE<< / >> ANGLE/IPC DVD SELECT VCR SELECT TV VOLUME OPEN/CLOSE, EJECT EZ VIEW REWIND, SKIP BACK 10 STOP 11 DISC MENU 12 MENU 13 LEFT 14 RECORD 15 TEST 16 SPEAKER 17 TV/VCR 18 MODE, REPEAT 19 TITLE, SPEED 20 TV STANDBY/ON 21 0-9...
6 The VCR Deck is active. 10 COPY mode indicator Accessories You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box. AUDIO & VIDEO CABLE OWNER’S INSTRUCTIONS...
Deciding How to Connect DVD-VCR You must take into account various factors when connecting audio or video systems: Types of connectors available on your systems Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily (camcorder for example) Your DVD-VCR is equipped with the following connectors.
Connecting DVD-VCR to the TV using the Coaxial Cable To receive television programmes a signal must be received from one of the following sources: An outdoor aerial An indoor aerial DVD & VCR AUDIO A cable television network RADIO ANT. A satellite receiver COAXIAL Make sure that both the television and the DVD-VCR...
Connecting DVD-VCR to a Satellite Receiver or Other Equipment You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities.
Plug & Auto Set up Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in DVD & VCR memory. The process takes a few minutes. Your DVD-VCR will AUDIO then be ready for use.
Tuning Your Television for the DVD-VCR You must tune your television for the DVD-VCR only if you are not using a Scart cable To view pictures from your DVD-VCR when a Scart cable is used, the television must be set to the audio/video mode (AV).
Deck Control Keys The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck. STANDBY/ON PHONES STANDBY/ON Button Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR. DVD Button Press the DVD button on the remote control when you want to control the DVD deck.
Basic TV Tuner Operations The following buttons are used when watching television via the DVD-VCR’s built-in TV tuner. TV/VCR Button Press to switch between your TV’s tuner and the VCR’s internal tuner. PROG Button Press to change to the next or previous channel. 0-9 Buttons Press to select channels directly.
Copying from DVD to VCR The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. If the DVD you are attempting to copy is copy EJECT STANDBY/ON PHONES SELECT S.MODE COPY...
Setting the Date and Time Your DVD-VCR contains a 24-hour clock and calendar used to: Automatically stop programme recording Preset your DVD-VCR to record a programme automatically Language : English You must set the date and time when: Install You purchase the DVD-VCR User Set Auto Power Off : Off...
Presetting the Stations Automatically You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13). Your DVD-VCR contains a built-in tuner used to receive television Language : English broadcasts.
Presetting the Stations Manually You do not need to preset the stations manually if you have already set them automatically. Language : English After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed. Install User Set Press the corresponding buttons to select the...
Clearing a Preset Station If you have stored a TV station: That you do not require Language : English At the wrong programme position Install you can cancel it. User Set Auto Power Off : Off Screen Messages : On After pressing the MENU, press the OK or ❿...
Changing the Preset Station Table You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences. Language : English Install User Set After pressing the MENU, press the OK or ❿ . Auto Power Off : Off Screen Messages...
Selecting the RF OUT Sound Mode (G-K ) You can choose the sound mode (G-K ) according to the TV set connected to your VCR. Language : English Install After pressing the MENU, press the OK or ❿. User Set Auto Power Off : Off Result:...
Selecting the Colour Mode Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception Language : English standard when you select AUTO. Install When playing back a cassette, the standard is User Set Auto Power Off : Off...
Intelligent Picture Control The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. Language : English During playback, press the MENU button on the remote control. Install User Set Press the OK or ❿ . Auto Power Off : Off Result:...
ShowView Extend To prevent delays or over-runs the VCR has a function called ShowView Extend allowing you to extend the recording time by Language : English up to 60 minutes. Install Only use if PDC is not available or set to Off. User Set Auto Power Off : Off...
Screen Messages Your DVD-VCR displays most information on both the DVD-VCR and the television. You can choose to display or hide this information on the television screen (except for the SEARCH, Programming MENU and Timer functions, which cannot be hidden). Language : English After pressing the MENU, press the OK or ❿...
Repeat Play You can set repeat play to repeat the tape continuously from beginning to end. Language : English After pressing the MENU, press the corresponding ❷ Install buttons to select the option. User Set Auto Power Off : Off Screen Messages : On Press the OK or ❿!buttons to select this option.
Selecting the Recording Speed You can record a cassette at two different speeds: SP (Standard Play) Type Recording Time (in SP) LP (Long Play) E-180 180 mins. or 3 hours In Long Play modes: E-240 240 mins. or 4 hours E-260 260 mins.
Protecting a Recorded Cassette Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. If you wish to protect a cassette, break off the tab using a small screwdriver.
Recording a Programme with Automatic Stop This function enables you to record up to nine hours (LP) of programmes. Your DVD-VCR stops automatically after the requested length of time. EJECT STANDBY/ON PHONES SELECT S.MODE COPY PROG P.SCAN Switch on the television. To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).
Using the ShowView Before presetting your DVD-VCR: Switch on both the television and your DVD-VCR Check that the date and time are correct Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset. To enter a , press the TIMER button.
Modifying ShowView Programming If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press RETURN a second time to confirm. If you wish to... Then... Press the ➛ or ❿ buttons, until the Select an input source other selection flashes.
Using the Timer Programming Feature The Timer Programming feature allows you to preset the DVD- Timer Method VCR to record a programme up to one month before that Standard programme is to be broadcast. Up to six programmes can be ShowView preset.
Checking a Preset Recording You can check your preset recordings: When you have finished presetting the DVD-VCR If you have forgotten which programmes will be recorded Press TIMER on the remote control. Result: The Timer Method is displayed. Press the OK button to select Standard option.
Playing a Cassette This function allows you to play back any pre-recorded cassette. Switch on both the television and your DVD-VCR. Insert the video cassette to be played. If the safety tab on the ❿ cassette is intact, press Otherwise, the cassette is played automatically. When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking).
Selecting the Audio Output Mode You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available. Option Description Used to listen to the sound on the left Hi-Fi channel. Used to listen to the sound on the right Hi-Fi channel.
Playing a Sequence at Variable Speeds You can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: You wish to analyze a sportsperson’s technique, movement by movement. The Shuttle function is available on the Remote control No sound is heard when playing a sequence at variable speeds.
Searching for a Specific Sequence Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows: Prev Seq.
Page 40
Searching for a Specific Sequence Intro Scan After pressing the SEARCH, press the corresponding ❷ buttons, until the Intro Scan option is selected. Press the OK or ❿!. ➛ ➛ ❿ ❿ Press the buttons depending on the direction where your desired programme is located. When an Index mark is found the DVD-VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
Using the Tape Counter The tape counter: Indicates the elapsed time in the play and record modes (hours, minutes and seconds) Is reset when a cassette is inserted in the DVD-VCR Allows you to find the beginning of a sequence easily 0:00:00 If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
Connecting an RCA Audio/Video Input Cable You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available DVD & VCR AUDIO on the equipment chosen. RADIO ANT. Examples: You wish to copy a video cassette with the help of COAXIAL a second VCR (see page 43).
Recording from Another VCR or Camcorder You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a camcorder. It is an infringement of copyright laws to copy EJECT prerecorded cassettes or to re-record them in any form SELECT STANDBY/ON PHONES S.MODE...
Audio Dubbing a Pre-recorded Cassette With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from: A CD, DVD A microphone connected to a sound system A cassette player Restriction: Audio dubbing is applicable only to the longitudinal audio track (normal audio).
Using the TV Buttons on the Remote Control Your DVD-VCR remote control will work with Samsung televisions and compatible brands. To determine whether your television is compatible, follow the instructions below. Switch your television on. Point the remote control towards the television.
Choosing a Connection The following show examples of connections commonly used to connect the DVD -VCR player with a TV and other components. It is only available for DVD. The VCR out can not watch by this connection. Connection to an Television Television Television COMPONENT VIDEO OUT...
Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch Setup a movie. Setup Setup Display Setup Using the Disc Menu Language This function changes the text language only on the disc menu screens.
Page 48
Setting Up the Language Features Language Setup Using the Audio Language Disc Menu : English Audio : English Subtitle : Automatic With the unit in Stop mode, press the MENU button. buttons, then OK or ❿ button. Select DVD using "...
Setting Up the Audio Options With the unit in Stop mode, press the MENU button. buttons, then OK or ❿ button. Select DVD using " ❷ Setup Setup Select Audio Setup using buttons, then press the OK or " ❷ Setup ❿...
Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the Setup Setup types of DVDs that your family watches. Setup Display Setup There are up to 8 rating levels on a disc. With the unit in Stop mode, press the MENU button.
Setting Up the Display Options With the unit in Stop mode, press the MENU button. Setup buttons, then OK or ❿ button. Select DVD using " ❷ Setup Setup Select Display Setup using buttons, then press the OK " ❷ Display Setup or ❿...
Component Connections (for DVD) Component video output is available only for DVD playback. RF and Line input are available for Tuner and VCR playback. SPEAKERS DVD Only FRONT R FRONT L WOOFER If your TV set supports Progressive Scan, it can transmit Pr, Pb, and COMPONENT VIDEO OUT Y signals separately, so you can enjoy sharp and clear picture.
Special Playback Features During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the ❿ ll button. Still ❿ Press the ll button on the remote control during playback. The picture will still and the audio will mute. ❿...
Adjusting the Aspect Ratio (EZ View) To play back using aspect ratio (DVD) Press the EZ VIEW button. • The screen size changes when the button is pressed repeatedly. • The screen zoom mode operates differently depending on the screen setting in the initial DVD menu. •...
Page 55
Adjusting the Aspect Ratio (EZ View) If you are using a 4:3 TV For 16:9 aspect ratio discs • 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. •...
Using the Display Function (DVD/VCD/CD) When Playing a DVD During play, press the INFO. button on the remote. Use the buttons to select the desired item. " ❷ Use the ➛, ❿ buttons to make the desired setup. • You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from the desired time.
Changing the Camera Angle Using the ANGLE button When a DVD contains multiple angles of a particular scene, you can select the Angle function. Press the ANGLE button to see if an ANGLE ( ) mark is present at the upper left hand corner of the screen. When an ANGLE mark is shown, press the ANGLE button, then an ANGLE select icon will appear at the upper left hand corner of the screen.
Repeat Play Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. When playing a DVD Press the REPEAT button on the remote. Repeat screen appears. Select Chapter, Title or A-B using the ➛, ❿ buttons. •...
Repeat Chapter/Title You can repeat a single chapter or a complete title. Open Repeat Menu Press the REPEAT button while in Play mode to open the Repeat menu. The current Repeat mode will be highlighted. Select “Chapter” Use the ➛, ❿ buttons to select “Chapter”. When you select Chapter “Chapter”...
Using the Mark Function (DVD/VCD) This feature lets you bookmark sections of a DVD or VCD so you can quickly find them at a later time. Using the Mark Function (DVD/ VCD) During play, press the MARK button on the remote. The Mark icons will be displayed.
MP3-CD Playback MP3-CD Playback ROOT ROOT Data CDs (CD-Rs, CD-RWs) encoded in MP3 (MPEG1 Audio Layer 3) CLASSIC format can be played. METAL Before You Begin... WMAMP3 • Set the channel to "3" or use the TV/VIDEO button on the TV to select the input source.
WMA Play WMA Disc Playback Before You Begin... • Set the channel to "3" or use the TV/VIDEO button on the TV to select the input source. • Press the DVD button on the remote control to switch to DVD mode. Press the OPEN/CLOSE button to open the disc tray, and then load the disc.
MP3/WMA Play CD-R MP3/WMA discs When you record MP3 files on the CD-R, please refer to the following. • Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac.
Program Play & Random Play You can listen to songs randomly or in the desired sequence. PROGRAM RANDOM Up to 20 tracks can be programmed. This function is available only with Audio CDs. Before You Begin... • Set the channel to "3" or use the TV/VIDEO button on the TV to select the input source.
Picture CD Playback Before You Begin... ROOT ROOT • Set the channel to "3" or use the TV/VIDEO button on CLASSIC the TV to select the input source. • Press the DVD button on the remote control to switch to METAL DVD mode.
Page 66
Picture CD Playback CD-R JPEG Discs • Only files with the ".jpg" and ".JPG" extensions can be played. • If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. •...
Setting the Delay Time A delay effect can be added to the sound from the Center and Surround speakers to adjust the sound according to the acoustic condition of the listening room. Initially, the delay time is set to ‘0 ms’. •...
About Speaker Setup Ideal Speaker Arrangement SPEAKERS FRONT R FRONT L WOOFER DVD & VCR AUDIO SURROUND R SURROUND L CENTER RADIO ANT. SPEAKERS DVD Only FRONT R FRONT L WOOFER COMPONENT VIDEO OUT COAXIAL VIDEO SURROUND R SURROUND L CENTER S-VIDEO OUT Center Speaker...
Page 69
About Speaker Setup To Set the Speaker Balance Press the SPEAKER button. Each time you press the button, the selection will change as follows: FL " C " FR " SR " SL " SU " VOL. Press AMP VOL + and AMP VOL - buttons to adjust the speaker volume.
Sound Mode Function Sound Mode Press the SOUND MODE button. Each time you press the button, the mode will change as shown at right. 4 STEREO/NATURAL/JAZZ/CONCERT/STADIUM – These effects are available in DSP mode. - NATURAL : When listening to regular audio (TV/Radio) - JAZZ : When listening to jazz or pop songs - CONCERT : When listening to classical music - STADIUM : When listening to live music or sports broadcast...
Listening to the Radio You can either automatically or manually tune in to an FM or AM station. Press the FM/AM button. Each time you press the button, the selection will toggle between FM and AM. Tune in to the desired station. Automatic Tuning 1 Press PROG button.
Presetting Stations You can store up to 30 stations (20 FM stations and 10 AM stations). Example: Storing an FM station of 87.50 MHz into the preset station number 01 Press the FM/AM button to select "FM". Each time you press the button, the selection will toggle between FM and AM.
Problems and Solutions (VCR) Before contacting the Samsung after-sales service, perform the following simple checks. Problem Explanation/Solution No power Check that the power plug is connected to a wall outlet. Have you pressed the STANDBY/ON button? You cannot insert a video cassette A video cassette can only be inserted with the window side up and the safety tab facing you.
Troubleshooting Guide (DVD) Before requesting service (troubleshooting) Problem Action Page Ensure that the disc is installed with the label side facing up. Check the region number of the DVD. Disc does not play. This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a 5.1 channel sound is reproduced only when the following conditions are met.