Ethernet Cfm Mep Level - Dell PowerEdge M420 Reference Manual
Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs
Also See for PowerEdge M420:
- Configuration manual (1246 pages) ,
- Getting started manual (202 pages) ,
- Owner's manual (121 pages)
Table of Contents
Advertisement
Default Configuration
CCMs are not sent by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ethernet cfm cc level 1 vlan 15 interval 10
ethernet cfm mep level
Use the ethernet cfm mep level command in Interface Configuration mode
to create a Maintenance End Point (MEP) on an interface at the specified
level and direction. MEPs are configured per Maintenance Association per
Maintenance Domain. Use the no form of the command to delete a MEP.
Syntax
ethernet cfm mep level
Parameter Description
Parameter
level
direction
mpid
vlan
Default Configuration
No MEPs are preconfigured.
0-7
direction
Description
Maintenance association level
Up indicates the MEP is facing towards Bridge Relay Entity.
Down indicates the MEP is facing towards the LAN.
Maintenance entity identifier
VLAN on which the MEP operates.
up|down
1-8191
mpid
Ethernet CFM Commands
1-4093
vlan
411
- Quick Links:
- Table of Contents
- Ethernet Configuration
Hide quick links:
Advertisement
Chapters
Table of Contents
