LG 26LH1DC1 Installation And Operating Manual page 63
Operation guide
Hide thumbs
Also See for 26LH1DC1:
- Specifications (2 pages) ,
- Specifications (2 pages) ,
- Installation and operating manual (84 pages)
Table of Contents
Advertisement
(Continued
from previous page)
The value range is 0 to 63, with 63 as the default,
which gives the user the full range of volume control, if
item 008 MIN VOLUME is also set at 0. Change values
with Left/Right
ADJ button.
It may be best to set the
same value on every 26LH1DC1.
*Note:
The maximum
volume
level cannot
have
a value setting
lower
than the MIN VOLUME level (described previously).
010 - MUTE DISABLE
Enables or disables sound mute function.
If set to 1,
sound cannot be muted, mute is disabled. If set to 0,
sound can be muted.
011 - KEY DEFEAT (Keyboard
Defeat)
If set to 1, key defeat
prevents
the end user from
accessing
the on-screen
menus with the display front
panel--MENU,
SELECT, and Left / Right arrow keys and
TV/AV do not function.
If set to 0, those
keys do
function.
*Note: The menus can always be accessed by pressing MENU on the
remote.
012 - IR BANKS EN. (IR Banks Enable)
For direct access to a particular
Channel Bank. When
enabled, installer can access a channel bank by inputting
the IR code for the bank.
013 - SCAN MODE
Allows variation in setting the On/Off
with Channel
UP/DOWN.
You may opt for TV channels only; TV
channels + Off/ON;
TV channels + FM radio; TV
channels + FM radio + Off/On
with these set-tings
for
Scan Mode:
SCAN MODE
0
Characteristics
Channel up/down
keys change
channels only.
Channel down below the lowest channel
(or channel up higher than the highest)
and TV turns off.
014 - STRT CH IN SM (Start
Channel in Scan Mode)
When set to 1, installs TV On/Off
event below the
start channel at TV turn on.
015 - SLEEP TIMER
If set to 1, the SLEEP TIMER feature may be used. If
set to 0, the Sleep Timer is not available.
016 - EN TIMER (Enable
On/Off
Timers)
If set to 1, Timer function
is available to user. Set to 0
to disable On/Off
Timer functions.
(Clock must be set in
order to use Timers.)
017 - ALARM
Gives the installer
the option
of making the Alarm
function
available to the end user. If set to 1, Alarm
function
is available to end user. Set to 0 to disable the
Alarm function.
*Note: The maximum volume level cannot have a value setting lower
than the MIN VOLUME level (described previously).
Installer should leave item 20 FEATURE LEVEL set to 1
(default).
020 - FEATURE LEVEL
Default
set to ZEN 1 for LG IR remote
_
ontrol opera-tion.
Set O, P LBL for LG Private
Label IR remote con-trol operation.
Warning:
Do not set to "0" or remote will not control
TV.
021
- V-CHIP
(Parental
Control)
Set
to 1 to activate
V-Chip
(Parental
Control);
have it
available
to end user to filter
and control
or otherwise
restrict
programming
content
that
can appear.
Set
to 0
to turn
V-Chip
feature
Off,
not
available
to user; no
programming
restrictions
can be set.
022 - MAX BLK HRS (Maximum
Block Hours)
Sets hours from 0 to 99 for the maximum V-Chip
(Parental Control)
block hours. Default setting
is for 12
blocking hours.
025 - CAPTION
LOCK
Set to 1 to restore previous caption On/Off
state after
turn Off. If set to 0, captions are always Off at turn
On.
025 - FUNCTION
PRE. (Function
Preview)
Set to 0 to suppress CHANNEL PREVIEW from the
FUNCTION
menu with some Pay-Per-View systems.
027 - HOSPITAL MODE
The default is 2 (which favors most hospitals).
With this
setting
two things are affected: Channel Banks 1,2,
and
3 are accessible, while Bank 4 is inactive.
028 - CH. OVERIDE (Channel
Override)
If set to 1, the user can select channels with either
Channel up/down or by direct keypad entry. If set to 0,
only those channels that are entered for scanning can
be selected.
029 - OLD OCV (On Command
Video
TM)
Set to 1 for operation
with systems from On Command
Corporation.
(Continued
on next page)
N
0
I'rl
N
J
>
r-"
0
I'rl
63
Advertisement
Table of Contents
Troubleshooting
