Table of Contents
Advertisement
Sample Network Configurations
This section describes some typical installation modes for the VB101.
Be sure to assign a fixed IP address o the VB101.
Sample LAN Environment Configuration
Viewer PC
This example shows the VB101 connected to a LAN by Ethernet. In this configuration, videos can
be seen by viewers in the same Ethernet segment as the VB101 and by viewers with access to
that segment.
To send log information such as faults and access statuses by e-mail and save that information to
another computer, an SMTP server or a Syslog server is required.
To automatically assign an IP address for the VB101, a BOOTP server is required.
Sample Dialup Environment Configuration
This example shows the VB101 connected in a dialup environment. In this configuration, videos
can be accessed by viewers which can dial up to the VB101 using a modem.
In this situation, a modem card must be inserted into the card slot (use a recommended modem
card). PPP (Point to Point Protocol) is used as the network protocol. For information on settings,
refer to Chapter 3 (→ P.41).
28
VB101
Router
Modem
Viewer PC
192.168.101.2 is set.
Server
Router
Public switched
telephone network
Call 123-4567
Provide the appropriate
server as required:
G HTTP (WWW)
G SMTP (mail)
G Syslog (log)
G BOOTP
Viewer PC
Modem card
Insert modem card.
VB101
PPP local
: 192.168.101.1
PPP remote : 192.168.101.2
Advertisement
Table of Contents
Troubleshooting
