Table of Contents
Advertisement
Upgrading the Firmware Remotely
When a new version of the firmware is released, the firmware can be upgraded remotely. To
upgrade remotely, use the "vbrfu.exe" program on the CD-ROM and the new firmware.
Obtain the new firmware.
1
Visit the following Web site (URL:http://www.canon.com/webview) for the latest
information on new firmware.
Launch the "vbrfu.exe" program on the enclosed CD-ROM and used
2
the procedure below to perform the remote upgrade.
Enter the IP address, user name and password.
1
Specify the firmware file to be downloaded to the server.
3
(5) The completion window appears.
Do not turn the VB101 off until the completion window appears. Turning the
c
VB101 off before the completion window appears may prevent the VB101 from
Note
starting up properly.
G Server Address: Camera server IP address
G HTTP Port : The HTTP port No. of the camera server
(Default setting = 80)
G Administrator Name: Server administrator user name
G Administrator Password: Server administrator password
The current version is displayed.
2
Store the downloaded firmware in
4
flash ROM.
Using the Enclosed Software
161
Advertisement
Table of Contents
Troubleshooting
