Table of Contents
Advertisement
IntuiKey Keyboard
–
Entering a two digit shot number followed by ENTER selects a previously programmed camera
position for the currently controlled camera.
NOTICE! This function is also accomplished by pressing the SHOT button (located next to the
i
joystick) and holding it down for more than 1 second.
–
–
–
–
NOTICE! If ENTER is held down, the Aux command auto-repeats until the key is released.
i
Bosch Security System, Inc.
Show Shot
Press Keypad Shot, and the status display changes for input as shown in Figure B.5.
----
Show Shot
Allegiant
Figure B.5 Allegiant Show Shot Status Display
--
Remove Scene
Allegiant
Figure B.6 Allegiant Remove Scene Status Display
Preset Scene Control
This command is specific to G3 AutoDome cameras; pressing this key displays a camera
on-screen display.
Remove Scene from Tour
Press Clear Shot, and the status display changes to the display shown in Figure B-6.
Not Used
Aux Off
Press this softkey to enter a number associated with an auxiliary command. The status
display changes to an entry box. See the individual device control section for details of
the Camera Functions menu.
User Manual
| en
39
F.01U.127.291 | 1.93 | 2009.03
Hide quick links:
Advertisement
Table of Contents
