Table of Contents
Advertisement
10
en | Controlling Allegiant Series Video Switchers
F.01U.127.291 | 1.93 | 2009.03
Alarm Control
Alarm commands control the system's automatic video switching
capabilities in response to alarm signals activated in the Allegiant
system. The camera activated by an alarm is normally the same as
the alarm number, but this relationship can be changed using the
optional LTC 8059/00 Master Control Software for Windows® or
the optional LTC 8850/00 Graphical User Interface software
package. These optional software packages even permit up to
four (4) cameras to be alarmed by a single alarm input.
Figure 2.5 Alarm Control Menu
–
–
–
NOTE: Alarm video appears on a given monitor only if the monitor
is armed and the alarm is armed for that monitor. The on-screen
monitor status display shows MA (Monitor Armed).
–
User Manual
Exit
Arm
Alarm
Arm
Disarm
All
All
Alarms
Alarms
Arm
Disarm
Monitor
Monitor
Arm/Disarm Alarm
To arm/disarm an individual alarm on the monitor currently
controlled by the keyboard:
a.
Press the Arm/Disarm Alarm softkey. The status display
changes to the following:
b.
Enter the alarm number to be armed/disarmed, using
the numeric keypad.
c.
Press ENTER.
Arm/Disarm All Alarms
To arm/disarm all alarms on the currently controlled monitor,
simply press the Arm/Disarm All Alarms softkey.
Arm Monitor
Press the Arm Monitor softkey to arm the monitor currently
controlled by the keyboard, permitting cameras for armed
alarms to automatically display when an alarm occurs.
Disarm Monitor
Pressing the Disarm Monitor softkey disarms the monitor
currently controlled by the keyboard, thus prohibiting the
monitor from responding to alarms.
IntuiKey Keyboard
Bosch Security System, Inc.
Hide quick links:
Advertisement
Table of Contents
