Page 1 ® ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 3 ® ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 4 © Copyright Lenovo 2008. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Page 5: Table Of Contents
Numeric error codes . . 39 Bottom view . . 136 Error messages . . 43 Rear view (ThinkPad X200 UltraBase) . . 137 Beep symptoms . . 44 Bottom view (ThinkPad X200 UltraBase) . . 138 © Copyright Lenovo 2008...
Page 6 Parts list . . 139 Recovery discs . . 165 Overall . 140 Common service tools . 170 LCD FRUs . . 154 Keyboard . . 161 Notices ....171 Miscellaneous parts .
Page 7: About This Manual
ThinkPad products. Use this manual along with the advanced diagnostic tests to troubleshoot problems effectively. Before servicing a ThinkPad product, be sure to read all the information under “Safety information” on page 1 and “Important service information” on page 17. © Copyright Lenovo 2008...
Page 8 ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 9: Safety Information
“Safety inspection guide” on page 5 v “Handling devices that are sensitive to electrostatic discharge” on page 6 v “Grounding requirements” on page 6 v “Safety notices: multilingual translations” on page 7 v “Laser compliance statement” on page 14 © Copyright Lenovo 2008...
Page 10: General Safety
General safety Follow these rules to ensure general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3.
Page 11: Electrical Safety
Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges.
Page 12 v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. v Do not service the following parts with the power on when they are removed from their normal operating places in a machine: –...
Page 13: Safety Inspection Guide
Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items.
Page 14: Handling Devices That Are Sensitive To Electrostatic Discharge
Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD.) ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.
Page 15: Safety Notices: Multilingual Translations
Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer.
Page 16 Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing.
Page 17 Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Page 18 Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
Page 19 Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes. Seek medical care if any symptoms from the fluid are present after washing.
Page 20 Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Page 21 Safety notice 8 DANGER Before removing any FRU, power off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Page 22: Laser Compliance Statement
Laser compliance statement Some models of ThinkPad computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S.
Page 23 A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
Page 24 ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 25: Important Service Information
“Important information about replacing RoHS compliant FRUs” on page 21 Important: BIOS and device driver fixes are customer-installable. The BIOS and device drivers are posted on the customer support site http://www.lenovo.com/support System Disassembly/Reassembly videos that show the FRU removals or ®...
Page 26: Strategy For Replacing A Hard Disk Drive
v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue. v Some computers have both a processor board and a system board. If you are instructed to replace either the processor board or the system board, and replacing one of them does not correct the problem, reinstall that board, and then replace the other one.
Page 27: Strategy For Replacing Frus For Cto, Cmv, And Gav
MT and 3-digit model, where model = “CTO” (Example: 1829-CTO). Custom Model Variant (CMV) This is a unique configuration that has been negotiated between IBM or Lenovo and the customer. A unique 4-digit MT and 3-digit model is provided to the customer to place orders (Example: 1829-W15).
Page 28 (this is the same record found in PEW). v eSupport can be accessed at the following Web site: http://www.lenovo.com/ support v To view the key commodities, click on PARTS INFORMATION, then PARTS LOOKUP.
Page 29: Important Information About Replacing Rohs Compliant Frus
FRU part numbers. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006, will contain some RoHS compliant FRUs.
Page 30 ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 31: General Checkout
Consider replacing a FRU only when a problem recurs. If you suspect that a FRU is defective, clear the error log and run the test again. If the error does not recur, do not replace the FRU. v Be careful not to replace a nondefective FRU. © Copyright Lenovo 2008...
Page 32: What To Do First
What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: __ 1. Name and phone number of servicer __ 2. Date of service __ 3.
Page 33: Checkout Guide
Checkout guide Use the following procedures as a guide in identifying and correcting problems with the ThinkPad computer. Note: The diagnostic tests are intended to test only ThinkPad products. The use of non-ThinkPad products, prototype cards, or modified options can lead to false indications of errors and invalid system responses.
Page 34: Diagnostics Using Pc-Doctor For Dos
PC-Doctor. This section is an overview of the procedure. For details that depend on model-unique functions, refer to “ThinkPad X200 Tablet” on page 47. Note: PC-Doctor for DOS is available at following Web site: http://www.lenovo.com/ support To create the PC-Doctor diagnostic diskette, follow the instruction on the Web site.
Page 35 Note: PC-Doctor menu does not mean the formal support device list. Some unsupported device names may appear in the PC-Doctor menu. Diagnostics Interactive Tests Hardware Info Utility Quit F1=Help Run Normal Test Run Quick Test CPU/Coprocessor Systemboard Video Adapter Serial Ports Parallel Ports Fixed Disks Diskette Drives...
Page 36: Pc-Doctor For Windows
Select one of the categories listed below to display symptoms and solutions: v Check System Health v System and Device Tests v Lenovo Troubleshooting Center v System Reports v Updates and Support PC-Doctor for Rescue and Recovery ®...
Page 37: Power System Checkout
Power system checkout To verify a symptom, do the following: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the ac adapter. 4. Check that power is supplied when you turn on the computer. 5. Turn off the computer. 6.
Page 38: Checking Operational Charging
Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it return to room temperature.
Page 39: Checking The Backup Battery
Checking the backup battery Do the following: 1. Power off the computer, and unplug the ac adapter from it. 2. Turn the computer upside down. 3. Remove the battery pack (see “1020 Battery pack” on page 63). 4. Remove the backup battery (see “1090 Backup battery” on page 78). 5.
Page 40 ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 41: Related Service Information
Service Web site: When the latest maintenance diskette and the system program service diskette become available, they will be posted on http://www.lenovo.com/spm Restoring the factory contents by using Product Recovery discs When the hard disk drive (HDD) or solid state drive (SSD) is replaced because of a failure, no Product Recovery program is on the new drive.
Page 42: Passwords
If it has, it can be used for access to the hard disk drive. If no master HDP is available, neither Lenovo nor Lenovo authorized servicers provide any services to reset either the user or the master HDP, or to recover data from the hard disk drive.
Page 43: How To Remove The Power-On Password
Attention: If User only mode is selected and the user HDP has been forgotten and cannot be made available to the servicer, neither Lenovo nor Lenovo authorized servicers provide any services to reset the user HDPs or to recover data from the hard disk drive.
Page 44 Note: To check whether the ThinkPad computer supports the Passphrase function, enter the BIOS Setup Utility and go to Security --> Password. If Using Passphrase item is displayed in the menu, this function is available on the ThinkPad computer. 3. Select Security, using the cursor directional keys to move down the menu. 4.
Page 45: Power Management
Power management To reduce power consumption, the computer has three power management modes: screen blank, standby, and hibernation. Screen blank mode If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. ®...
Page 46: Hibernation Mode
v The ring indicator (RI) is signaled by a serial device or a PC Card device. v The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters standby mode. Wait a few seconds before taking any action to reenter operation mode.
Page 47: Symptom-To-Fru Index
Symptom-to-FRU index This section contains following information: v “Numeric error codes” v “Error messages” on page 43 v “Beep symptoms” on page 44 v “No-beep symptoms” on page 44 v “LCD-related symptoms” on page 45 v “Intermittent problems” on page 46 v “Undetermined problems”...
Page 48 Table 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0187 System board. EAIA data access error—The access to EEPROM is failed. 0188 System board. Invalid RFID Serialization Information Area. 0189 System board. Invalid RFID configuration information area—The EEPROM checksum is not correct.
Page 49 Table 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0250 1. Charge the backup battery for more System battery error—System battery is than 8 hours by connecting the ac dead. adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date.
Page 50 Warning: Your internal hard disk drive customer: If in the primary bay the customer (HDD) may not function correctly on this is using a non-IBM or non-Lenovo hard disk system. Ensure that your HDD is supported drive (HDD), or an old generation IBM...
Page 51: Error Messages
Error messages Table 2. Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. 3. System board. Allocation error for device. 1. Load “Setup Defaults” in the BIOS Setup Utility.
Page 52: Beep Symptoms
Beep symptoms Table 3. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or 1. Reseat the LCD connector. flashing LCD. 2. LCD assembly. 3. External CRT. 4. System board. One long and two short beeps, and a blank 1.
Page 53: Lcd-Related Symptoms
QXGA Notes: v Lenovo will not provide replacement if the LCD is within specification as we cannot guarantee that any replacement LCD will have zero pixel defects. v A bright dot means a pixel is always on (white or color.) v A dark dot means a pixel is always off (black color.)
Page 54: Intermittent Problems
Intermittent problems Intermittent system hang problems can be due to a variety of causes that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. FRU replacement should be considered only when a problem recurs.
Page 55: Thinkpad X200 Tablet
“FRU tests” on page 52 v “Fn key combinations” on page 54 v “FRU replacement notices” on page 56 v “Removing and replacing a FRU” on page 60 v “Locations” on page 134 v “Parts list” on page 139 © Copyright Lenovo 2008...
Page 56: Specifications
Specifications The following table lists the specifications of the ThinkPad X200 Tablet : Table 7. Specifications Feature Description ® ™ Processor v Intel Core 2 Duo processor SU9300 (1.2 GHz), 800-MHz FSB, 3-MB L2 cache v Intel Core 2 Duo processor SL9300 (1.6 GHz), 1066-MHz FSB, 6-MB L2 cache v Intel Core 2 Duo processor SL9400 (1.86 GHz), 1066-MHz FSB, 6-MB L2 cache...
Page 57 Table 7. Specifications (continued) Feature Description I/O port (ThinkPad X200 v External monitor connector Tablet) v Stereo headphone jack v Monaural microphone jack v Docking connector v RJ-11 (Modem) connector (some models) v RJ-45 (Ethernet) connector v Universal serial bus (USB) connector × 3 v 5-in-1 Media Card Reader slot (some models) v 3-in-1 Media Card Reader slot (some models) v ExpressCard slot...
Page 58: Status Indicators
Status indicators The system status indicators show the status of the computer, as follows: Table 8. Status indicators Indicator Meaning Wireless LAN Green: The wireless LAN feature is on, and the radio link is status ready for use. Blinking green: Data is being transmitted.
Page 59 Table 8. Status indicators (continued) Indicator Meaning Wireless PAN Green: Wireless PAN (Bluetooth wireless or Wireless USB) is status operational. This indicator is on when Wireless PAN is on and not in suspend mode. Wireless WAN Green: The wireless WAN is on, and the radio link is ready for status use.
Page 60: Fru Tests
FRU tests The following table shows the test for each FRU. Table 9. FRU tests Applicable test System board 1. Diagnostics --> CPU/Coprocessor 2. Diagnostics --> Systemboard 3. If the ThinkPad X200 UltraBase is attached to the ThinkPad computer, detach it. Place the computer on a horizontal surface, and run Diagnostics -->...
Page 61 Table 9. FRU tests (continued) Applicable test DVD drive or 1. Diagnostics --> Other Devices--> Optical Drive DVD/CD-RW combo 2. Interactive Tests --> Optical Drive Test drive Memory 1. If two DIMMs are installed, remove one of them and run Diagnostics -->...
Page 62: Fn Key Combinations
Fn key combinations The following table shows the function of each combination of Fn with a function key. Table 10. Fn key combinations Key combination Description Fn+F1 Reserved. Fn+F2 Lock the computer. Fn+F3 Select a power scheme that has been created by Power Manager. When you press this combination, a panel for selecting a power scheme appears.
Page 63 Table 10. Fn key combinations (continued) Key combination Description Fn+F7 Apply a presentation scheme directly, with no need to start Presentation Director. To disable this function and use the Fn+F7 key combination for switching a display output location, start Presentation Director, and change the settings.
Page 64: Fru Replacement Notices
FRU replacement notices This section contains notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the ThinkPad computer, this problem is addressed with special nylon-coated screws that have the following characteristics: v They maintain tight connections.
Page 65: Retaining Serial Numbers
Retaining serial numbers This section includes the following descriptions: v “Restoring the serial number of the system unit” v “Retaining the UUID” v “Reading or writing the ECA information” on page 59 Restoring the serial number of the system unit When the computer was manufactured, the EEPROM on the system board was loaded with the serial numbers of the system and all major components.
Page 66 When you replace the system board, you must set the UUID on the new system board as follows: 1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 4. Assign UUID. A new UUID is created and written.
Page 67 Reading or writing the ECA information Information on Engineering Change Announcements (ECA) are stored in the EEPROM of the system board. The electronic storage of this information simplifies the procedure to check if the ECA has been previously applied to a machine. The machine does not need to be disassembled to check for the ECA application.
Page 68: Removing And Replacing A Fru
Removing and replacing a FRU This section presents directions and drawings for use in removing and replacing a FRU. Be sure to observe the following general rules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts.
Page 69: Before Servicing Thinkpad X200 Tablet
Before servicing ThinkPad X200 Tablet Removing the SIM card: Some models of the ThinkPad X200 Tablet you are servicing might have the SIM card that the customer has been installed. If the computer you are servicing has the SIM card, remove it before you start the servicing.
Page 70: 1010 Digitizer Pen
1010 Digitizer pen Table 11. Removal steps of digitizer pen ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 71: 1020 Battery Pack
1020 Battery pack DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. Table 12. Removal steps of battery pack Unlock the battery release lever. Holding the battery release lever in the unlocked position 1 , remove the battery pack in the direction shown by arrow When installing: Install the battery pack along the slide rails of the slot.
Page 72: 1030 Hard Disk Drive (Hdd) Cover, Hdd, And Hdd Rubber Rails Or Solid State Drive (Ssd) And Storage Converter
1030 Hard disk drive (HDD) cover, HDD, and HDD rubber rails or solid state drive (SSD) and storage converter For access, remove this FRU: v “1020 Battery pack” on page 63 Attention: v Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock.
Page 73 Table 13. Removal steps of HDD cover, HDD, and HDD drive rubber rails or SSD and storage converter (continued) When installing: Make sure that the HDD connector or SSD connector is attached firmly. ThinkPad X200 Tablet...
Page 74 Table 13. Removal steps of HDD cover, HDD, and HDD drive rubber rails or SSD and storage converter (continued) HDD and HDD rubber rails: When installing: The rubber rails on the hard disk drive must be attached to the replacement drive. Otherwise the drive cannot be installed properly. SSD and storage converter: ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 75 Table 13. Removal steps of HDD cover, HDD, and HDD drive rubber rails or SSD and storage converter (continued) When installing: When you install the SSD in the storage converter, do as follows. ThinkPad X200 Tablet...
Page 76: 1040 Dimm
1040 DIMM For access, remove this FRU in order: v “1020 Battery pack” on page 63 Table 14. Removal steps of dimm Remove the DIMM slot cover as shown in this figure. Note: Loosen the screws 1 , but do not remove them. ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 77 Table 14. Removal steps of dimm (continued) Note: If only one DIMM is used on the computer you are servicing, the card must be installed in SLOT-0 ( a ), but not in SLOT-1 ( b ). When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place.
Page 78: 1050 Hinge Caps
1050 Hinge caps For access, remove this FRU in order: v “1020 Battery pack” on page 63 Table 15. Removal steps of hinge caps Open the LCD unit, and then remove the hinge cap (front). ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 79 Table 15. Removal steps of hinge caps (continued) Close the LCD unit, and then remove the hinge cap (rear). ThinkPad X200 Tablet...
Page 80: 1060 Keyboard
1060 Keyboard For access, remove this FRU in order: v “1020 Battery pack” on page 63 Table 16. Removal steps of keyboard Step Icon Screw (quantity) Color Torque M2 × 6 mm, wafer-head, Black 0.181 Nm nylon-coated (4) (1.85 kgfcm) ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 81 Table 16. Removal steps of keyboard (continued) Lift the keyboard a little in the direction shown by arrow 4 , and then detach the connector 5 . ThinkPad X200 Tablet...
Page 82 Table 16. Removal steps of keyboard (continued) When installing: 1. Attach the keyboard connector firmly. 2. Make sure that the keyboard edges are under the frame as shown in this figure. Then press the keys to latch the keyboard firmly in place. 3.
Page 83: 1070 Extension Cable Card
1070 Extension cable card For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 Table 17. Removal steps of backup battery Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (5) Black 0.181 Nm (1.85 kgfcm) M2 ×...
Page 84: 1080 Palm Rest
1080 Palm rest For access, remove this FRU in order: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 Table 18. Removal steps of palm rest Step Icon Screw (quantity) Color Torque M2 × 6 mm, wafer-head, Black 0.181 Nm nylon-coated (5)
Page 85 Table 18. Removal steps of palm rest (continued) When installing: When you attach the palm rest, do as follows: 1. Press the left and right top edges of the palm rest to fit it into place. 2. Push the front side of the palm rest until it clicks into place. 3.
Page 86: 1090 Backup Battery
1090 Backup battery DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest”...
Page 87 Table 19. Removal steps of backup battery (continued) When installing: Make sure that the battery connector is attached firmly. ThinkPad X200 Tablet...
Page 88: 1100 Pci Express Mini Card For Wireless Lan
1100 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 Table 20. Removal steps of PCI Express Mini Card for wireless LAN Full size PCI Express Mini Card: In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug...
Page 89 Table 20. Removal steps of PCI Express Mini Card for wireless LAN (continued) When installing: v In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN on the card, and the black cable into the jack labeled AUX.
Page 90 Table 20. Removal steps of PCI Express Mini Card for wireless LAN (continued) Harf size PCI Express Mini Card: In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.
Page 91 Table 20. Removal steps of PCI Express Mini Card for wireless LAN (continued) When installing: v Plug the gray cable into the jack labeled MAIN on the card, and the black cable into the jack labeled AUX. ThinkPad X200 Tablet...
Page 92: 1110 Pci Express Mini Card For Wireless Wan
1110 PCI Express Mini Card for wireless WAN For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 Table 21. Removal steps of PCI Express Mini Card for wireless WAN In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.
Page 93 Table 21. Removal steps of PCI Express Mini Card for wireless WAN (continued) When installing: When you install the card, plug the red cable into the jack labeled MAIN on the card, and the blue cable into the jack labeled AUX. If the computer you are servicing is the wireless WAN-ready model, put the antenna cables in the cable protection tube and place them as shown in this figure.
Page 94: 1120 Intel Turbo Memory Minicard Or Wireless Usb Adapter
1120 Intel Turbo Memory Minicard or wireless USB adapter For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 Table 22. Removal steps of Intel Turbo Memory Minicard or wireless USB adapter Note: Step 1 is only for models with the wireless USB adapter.
Page 95 Table 22. Removal steps of Intel Turbo Memory Minicard or wireless USB adapter (continued) When installing: In models with the wireless USB adapter, plug the yellow cable into the jack on the card. ThinkPad X200 Tablet...
Page 96: 1130 Bluetooth Daughter Card (Bdc-2.1)
1130 Bluetooth daughter card (BDC-2.1) For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 Table 23. Removal steps of Bluetooth daughter card Step Screw (quantity) Color...
Page 97 Table 23. Removal steps of Bluetooth daughter card (continued) Turn the Bluetooth daughter card over, and then disconnect the cable from the connector. When installing: Make sure that the connector 4 is attached firmly. ThinkPad X200 Tablet...
Page 98: 1140 Keyboard Bezel
1140 Keyboard bezel For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 Table 24. Removal steps of keyboard bezel Step Screw (quantity) Color...
Page 99 Table 24. Removal steps of keyboard bezel (continued) Step Screw (quantity) Color Torque M2 × 2 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) Rotate the LCD unit as shown in this figure. ThinkPad X200 Tablet...
Page 100 Table 24. Removal steps of keyboard bezel (continued) In step 5 , detach the claws. Then remove the keyboard bezel in the direction shown by arrow 6 . Attention: When you service the keyboard bezel, avoid any kind of rough handling.
Page 101: 1150 I/O Card Assembly
1150 I/O card assembly For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 v “1110 PCI Express Mini Card for wireless WAN” on page 84 v “1140 Keyboard bezel”...
Page 102 Table 25. Removal steps of I/O card assembly (continued) Note: The cable is secured with a double-faced adhesive tape. Turn the I/O card over, and then disconnect the cable from the flip-lock ZIF connector. ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 103: 1160 Usb Sub Card
1160 USB sub card For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1060 Keyboard” on page 72 v “1080 Palm rest” on page 76 v “1140 Keyboard bezel” on page 90 Table 26.
Page 104 Table 26. Removal steps of USB sub card (continued) Turn the USB sub card over, an then disconnect the cable from the connector. When installing: Route the cable as shown in this figure. ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 105: 1170 Lcd Assembly
1170 LCD assembly For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest”...
Page 106 Table 27. Removal steps of LCD assembly (continued) Step Screw (quantity) Color Torque M2.5 × 6 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 107 Table 27. Removal steps of LCD assembly (continued) Before step 3 , strip off the tapes securing the antenna cables, and release the cables from the cable guides of the frame. ThinkPad X200 Tablet...
Page 108 Table 27. Removal steps of LCD assembly (continued) When installing: Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
Page 109: 1180 Dc-In Connector, Fan, Digitizer Pen Case, And Pen Switch Assembly
1180 DC-in connector, fan, digitizer pen case, and pen switch assembly For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card”...
Page 110 Table 28. Removal steps of DC-in connector, fan, digitizer pen case, and pen switch assembly (continued) Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 111 Table 28. Removal steps of DC-in connector, fan, digitizer pen case, and pen switch assembly (continued) In step 6 and 7 , remove the digitizer pen case assembly. Step Screw (quantity) Color Torque M1.6 x 3 + 4.2A mm, shoulder socket-head, Black 0.181 Nm nylon-coated (1)
Page 112 Table 28. Removal steps of DC-in connector, fan, digitizer pen case, and pen switch assembly (continued) Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (6) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the position of the wireless switch, and firmly fit into the frame b .
Page 113 Table 28. Removal steps of DC-in connector, fan, digitizer pen case, and pen switch assembly (continued) Turn the system board over, and then disconnect the DC-in connector, the fan connector, and the pen switch connector from the system board. When installing: Make sure that the DC-in connector, the fan connector, and the Pen switch connector are attached to the system board firmly.
Page 114 Table 28. Removal steps of DC-in connector, fan, digitizer pen case, and pen switch assembly (continued) When installing: v Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component.
Page 115: 1190 System Board And Expresscard Slot Assembly
1190 System board and ExpressCard slot assembly Important notices for handling the system board: When handling the system board, bear the following in mind. v The system board has an accelerometer, which can be broken by applying several thousands of G-forces. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G’s of shock.
Page 116 Table 29. Removal steps of system board and ExpressCard slot assembly Following components soldered on the system board are extremely sensitive. When you service the system board, avoid any kind of rough handling. ICH (I/O Controller Hub) MCH (Memory Controller Hub) ™...
Page 117 Table 29. Removal steps of system board and ExpressCard slot assembly (continued) Note: The ExpressCard slot assembly is attached to the system board. Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) Turn the system board over, and then remove the ExpressCard slot assembly from the system board.
Page 118: 1200 Base Cover And Speaker Assembly
1200 Base cover and speaker assembly For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card”...
Page 119 Applying labels to the base cover: The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: Homologation label Product label Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
Page 120: 2010 Lcd Front Bezel
2010 LCD front bezel For access, remove this FRU: v “1020 Battery pack” on page 63 Table 31. Removal steps of LCD front bezel for Tablet Digitizer Pen model Tablet Digitizer Pen model: Step Screw cap Screw (quantity) Color Torque M2.5 ×...
Page 121 Table 31. Removal steps of LCD front bezel for Tablet Digitizer Pen model (continued) When installing: Attach the fingerprint reader connector firmly. ThinkPad X200 Tablet...
Page 122 Table 32. Removal steps of LCD front bezel for Touch panel and Tablet Digitizer Pen model Touch panel and Tablet Digitizer Pen model: Step Screw cap Screw (quantity) Color Torque M2.5 × 8 mm, wafer-head, Black 0.392 Nm nylon-coated (9) (4 kgfcm) M2 ×...
Page 123 Table 32. Removal steps of LCD front bezel for Touch panel and Tablet Digitizer Pen model (continued) When installing: Make sure that attach the fingerprint reader connector firmly. ThinkPad X200 Tablet...
Page 124: 2020 Micro-Processor Card
2020 Micro-Processor card For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “2010 LCD front bezel” on page 112 Table 33. Removal steps of Micro-Processor card Note: Step 1 is only for models with the inverter card. For models without the inverter card, skip step 1 .
Page 125 Table 33. Removal steps of Micro-Processor card (continued) Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (3) Silver 0.181 Nm (1.85 kgfcm) M2 × 3 mm, stud, wafer-head, nylon-coated Black 0.181 Nm (1.85 kgfcm) Note: In step 3 , The height of stud head for Tablet Digitizer pen model is 4.2 mm, and the height of stud head for Touch Panel and Tablet Digitizer Pen model is 5.5 mm.
Page 126: 2030 Inverter Card
2030 Inverter card For access, remove these FRUs in order: v “1020 Battery pack” on page 63 v “2010 LCD front bezel” on page 112 v “2020 Micro-Processor card” on page 116 Table 34. Removal steps of inverter card Note: Some models do no have the inverter card. Step Screw (quantity) Color...
Page 127: 2040 Hinges
2040 Hinges For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest”...
Page 128 Table 35. Removal steps of hinge (continued) Detach the hinge from the LCD rear cover, and gently pull the cables out through the guide hole in the hinge. Pull them all at once. As you pull them, be sure not to subject them to any tension, which could cause them to be damaged by the cable guides, or could break a wire.
Page 129: 2050 Lcd Panel And Lcd Cable
2050 LCD panel and LCD cable For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card”...
Page 130 Table 36. Removal steps of LCD panel and LCD cable for Tablet Digitizer Pen model Tablet Digitizer Pen model: Step Screw cap Screw (quantity) Color Torque M2.5 × 8 mm, wafer-head, Black 0.392 Nm nylon-coated (4) (4 kgfcm) M2 × 3.5 mm, wafer-head, Black 0.181 Nm nylon-coated (6)
Page 131 Table 36. Removal steps of LCD panel and LCD cable for Tablet Digitizer Pen model (continued) In step 4 , detach the claws. Then remove the LCD panel . When installing: Make sure that all the claws are attached firmly. ThinkPad X200 Tablet...
Page 132 Table 36. Removal steps of LCD panel and LCD cable for Tablet Digitizer Pen model (continued) Note: Step 5 is only for models with the integrated camera. For models without the integrated camera, skip step 5 . When installing: Make sure that the connector 5 is attached firmly. ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 133 Table 36. Removal steps of LCD panel and LCD cable for Tablet Digitizer Pen model (continued) Turn the LCD panel over, and then remove the LCD cable from the LCD panel. When installing: Make sure that the LCD cable connector are attached firmly. ThinkPad X200 Tablet...
Page 134 Table 37. Removal steps of LCD panel and LCD cable for Touch panel and Tablet Digitizer Pen model Touch panel and Tablet Digitizer Pen model: Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (4) Silver 0.181 Nm (1.85 kgfcm) ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 135 Table 37. Removal steps of LCD panel and LCD cable for Touch panel and Tablet Digitizer Pen model (continued) Note: Step 2 is only for models with the integrated camera. For models without the integrated camera, skip step 2 . When installing: Make sure that the connector 2 is attached firmly.
Page 136 Table 37. Removal steps of LCD panel and LCD cable for Touch panel and Tablet Digitizer Pen model (continued) Turn the LCD panel over, and then remove the LCD cable from the LCD panel. When installing: Make sure that the LCD cable connector are attached firmly. ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 137: 2060 Integrated Camera
2060 Integrated camera For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card” on page 75 v “1080 Palm rest”...
Page 138: 2070 Lcd Rear Cover And Wireless Antenna Cables
2070 LCD rear cover and wireless antenna cables For access, remove these FRUs in order: v “1010 Digitizer pen” on page 62 v “1020 Battery pack” on page 63 v “1050 Hinge caps” on page 70 v “1060 Keyboard” on page 72 v “1070 Extension cable card”...
Page 139 Table 39. Removal steps of LCD rear cover and wireless antenna cables (continued) In step 4 , release the antenna cables from the cable guides of the rear cover. ThinkPad X200 Tablet...
Page 140 Table 39. Removal steps of LCD rear cover and wireless antenna cables (continued) Remove the center latch from the LCD rear cover. Step Screw (quantity) Color Torque M2 × 3.5 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 141 Table 39. Removal steps of LCD rear cover and wireless antenna cables (continued) When installing: Place the antenna assembly as shown in this figure. Wireless WAN antenna, AUX (blue) Wireless LAN antenna, AUX (black) Wireless USB antenna (yellow) Wireless WAN antenna, MAIN (red) Wireless LAN antenna, MAIN (gray) MIMO antenna (white) Attention: As you route the antenna cables, make sure that they are not...
Page 142: Locations
Locations Front view Center latch Integrated camera (for some models) Universal serial bus (USB) connector Tablet digitizer pen Hard disk drive (HDD) or solid state drive (SSD) RJ-11 (modem) connector (for some models) Microphone jack Stereo headphone jack Universal serial bus (USB) connector TrackPoint pointing stick TrackPoint buttons Volume control buttons...
Page 143: Rear View
Rear view Status indicators Note: For the description of each indicator, see “Status indicators” on page ExpressCard slot Wireless radio switch Universal Serial Bus (USB) connector RJ-45 (Ethernet) connector External monitor connector AC power connector Security key hole Rear view (tablet mode) Tablet buttons Fingerprint reader Status indicators...
Page 144: Bottom View
Bottom view Battery pack Battery pack latch Docking connector DIMM slots Built-in speakers LCD cover latch 5-in-1 Media Card Reader or 3-in-1 Media Card Reader slot ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 145: Rear View (Thinkpad X200 Ultrabase)
Rear view (ThinkPad X200 UltraBase) AC power connector Universal serial bus (USB) connectors External monitor connector DisplayPort connector Headphone jack Microphone jack RJ-45 (Ethernet) connector Security keyhole Security lock key Universal serial bus (USB) connector Serial Ultrabay Slim device release latch Serial Ultrabay Slim device eject lever Serial Ultrabay Slim device Docking connector...
Page 146: Bottom View (Thinkpad X200 Ultrabase)
Bottom view (ThinkPad X200 UltraBase) Battery charger (behind the flip-down door) UltraBase eject request button UltraBase eject lever Power button security latch Power button Built-in stereo speakers ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 147: Parts List
Parts list This section contains following lists of the service parts. v “Overall” on page 140 v “LCD FRUs” on page 154 v “Keyboard” on page 161 v “Miscellaneous parts” on page 162 v “AC adapters” on page 163 v “Power cords” on page 164 v “Recovery discs”...
Page 148: Overall
Overall Table 40. Parts list—Overall FRU no. RoHS See “Miscellaneous parts” on page 162. LCD unit (see “LCD FRUs” on page 154.) Extension cable card assembly 42W8085 ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 149 Table 40. Parts list—Overall (continued) FRU no. RoHS USB sub card assembly 42W8086 Pen switch assembly 45N4817 Digitizer pen case assembly 45N3146 Backup battery 92P1210 Intel Turbo Memory 2-GB Minicard 42T0991 v 4184-CTO, 8Ex, 97x, E4x, E6x, E7x, EFx, EGx, ENx v 7448-CTO, 8Dx, 9Dx, E3x, E5x, E8x, EEx, EHx, EPx, FKx, G6x v 7449-CTO, 88x, 8Qx, 8Rx, 8Sx, 9Ax, 9Hx, E5x, E8x,...
Page 150 Table 40. Parts list—Overall (continued) FRU no. RoHS System board with Intel Core 2 Duo processor SL9300 42W8049 with TPM (1.6 GHz) v 4184-CTO, 8Ex, 97x, E4x, E6x, E7x, E9x, F4x, F5x, F7x, F8x, H6x v 7448-CTO, 8Dx, 8Vx, 8Wx, 8Xx, 9Dx, E3x, E5x, E8x, EAx, F3x, F5x, F6x, F8x, H5x v 7449-CTO, 99x, 9Ax, 9Bx, 9Cx, E5x, E8x, EAx, EWx, v 7450-CTO, 26x, 28x, 2Ax, 8Cx, 93x, 94x, 95x, 96x, E6x,...
Page 151 Table 40. Parts list—Overall (continued) FRU no. RoHS 512-MB DDR3-1066 SDRAM SO-DIMM (PC3-8500) card 43R1775 v 4184-CTO v 7448-CTO, 2Ex, 8Vx v 7449-CTO v 7450-CTO, 8Cx v 7453-CTO v 2263-CTO v 2266-CTO 1-GB DDR3-1066 SDRAM SO-DIMM (PC3-8500) card 43R1989 v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, F4x, F5x, F7x, F8x, H4x, H6x v 7448-CTO, 8Dx, 9Dx, 9Kx, 9Lx, E3x, E5x, E8x, EAx, EEx, EHx, EUx, F3x, F5x, F6x, F8x, FKx, H3x, H5x...
Page 152 Table 40. Parts list—Overall (continued) FRU no. RoHS Ericsson F3507g Other - Wireless WAN card 43Y6479 v 4184-CTO v 7448-CTO v 7449-CTO, FWx v 7450-CTO, 26x, 2Ax, 86x, 89x, 8Kx, 8Nx, 8Tx, EMx, ERx, FHx, FJx, FVx v 7453-CTO v 2263-CTO v 2266-CTO ThinkPad 11b/g Wireless LAN Mini PCI Express 43Y6511...
Page 153 Table 40. Parts list—Overall (continued) FRU no. RoHS I/O card assembly with modem connector, with 5-in-1 42W8011 Media Card Reader v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, H4x, H6x v 7448-CTO, 8Dx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F5x, F6x, F8x,...
Page 154 Table 40. Parts list—Overall (continued) FRU no. RoHS Battery pack, 8 cell 42T4658 v 4184-CTO, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, FFx, FGx, H4x, H6x v 7448-CTO, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, FEx, FGx, FKx, G6x, H3x, H5x v 7449-CTO, 84x, 88x, 8Fx, 8Jx, 8Lx, 8Qx, 8Rx, 8Sx, 99x, 9Ax, 9Bx, 9Cx, 9Hx, E5x, E8x, EAx, EHx, EKx, EPx, EUx, EWx, EYx, F9x, FLx, FNx, G5x, G6x...
Page 155 Table 40. Parts list—Overall (continued) FRU no. RoHS SATA hard disk drive, 160 GB, 9.5 mm, 5,400 rpm OP 39T2899 v 4184-CTO, 25x, E4x, E6x, E7x, F4x, F5x, FBx, FCx, v 7448-CTO, 2Ex, 8Vx, 9Kx, 9Lx, E3x, E5x, E8x, F3x, F5x, FAx, FCx, H5x v 7449-CTO, 25x, 9Ax, 9Ex, 9Fx, E5x, E8x, EWx, EYx, v 7450-CTO, 25x, 2Ax, 2Cx, 2Dx, 2Gx, 8Yx, 93x, E6x,...
Page 156 Table 40. Parts list—Overall (continued) FRU no. RoHS SATA hard disk drive, 250 GB, 9.5 mm, 5,400 rpm OP 42T1471 v 4184-CTO, 8Ex, 97x, EFx, EGx, ENx, F7x, F8x, FFx, FGx, H4x v 7448-CTO, 8Dx, 8Wx, 8Xx, 9Dx, EEx, EHx, EPx, F6x, F8x, FEx, FGx, FKx, G6x, H3x v 7449-CTO, 8Qx, 8Rx, 8Sx, 9Hx, EHx, EPx, FLx, FNx, FWx, FXx, G5x, G6x...
Page 157 Table 40. Parts list—Overall (continued) FRU no. RoHS SATA hard disk drive, 100 GB, 9.5 mm, 7,200 rpm OP 42T1485 v 4184-CTO v 7448-CTO v 7449-CTO, 99x v 7450-CTO, 26x 8Zx, 95x v 7453-CTO v 2263-CTO v 2266-CTO SATA hard disk drive, 100 GB, 9.5 mm, 7,200 rpm 39T2799 v 4184-CTO v 7448-CTO...
Page 158 Table 40. Parts list—Overall (continued) FRU no. RoHS SATA solid state drive, 64 GB, 8 mm 42T1898 v 4184-CTO, E9x, ESx v 7448-CTO, EAx, EUx v 7449-CTO, EAx, EUx v 7450-CTO, 8Ax, 8Tx, E9x, ERx, ESx, ETx, G7x v 7453-CTO, E9x, ESx v 2263-CTO v 2266-CTO SATA solid state drive, 80 GB, 8 mm...
Page 159 Table 40. Parts list—Overall (continued) FRU no. RoHS DVD/CD-RW combo drive, 9.5 mm 42T2543 v 4184-CTO v 7448-CTO v 7449-CTO v 7450-CTO v 7453-CTO v 2263-CTO v 2266-CTO DVD/CD-RW combo drive, 9.5 mm 42T2513 v 4184-CTO v 7448-CTO v 7449-CTO v 7450-CTO v 7453-CTO v 2263-CTO...
Page 160 Table 40. Parts list—Overall (continued) FRU no. RoHS Base cover assembly for 7450 45N3142 Base cover assembly for 7453 45N3143 Base cover assembly for 2263 45N3144 Base cover assembly for 2266 45N3145 Bluetooth daughter card (BDC-2.1) 44C9696 v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, H4x, H6x v 7448-CTO, 8Dx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx, E3x, E5x,...
Page 161 Table 40. Parts list—Overall (continued) FRU no. RoHS Fan assembly for LV 45N3131 v 4184-CTO, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, H4x, H6x v 7448-CTO, 8Dx, 8Vx, 8Wx, 8Xx, 9Dx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F5x, F6x, F8x, FAx, FCx, FEx, FGx, FKx, H3x, H5x v 7449-CTO, 84x, 88x, 8Fx, 8Jx, 8Lx, 8Qx, 8Rx, 8Sx, 99x,...
Page 162: Lcd Frus
LCD FRUs In ThinkPad X200 Tablet, there are following types of LCDs. v “12.1-in. WXGA TFT” on page 155 ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 163 12.1-in. WXGA TFT Table 41. Parts list—12.1-in. WXGA TFT FRU no. RoHS b - c See “Miscellaneous parts” on page 162. LCD bezel with fingerprint reader for Touch panel and 45N5354 Tablet Digitizer Pen model v 4184-CTO, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, H4x, H6x v 7448-CTO, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F5x, F6x, F8x, FAx, FCx, FEx, FGx, FKx, G6x,...
Page 164 Table 41. Parts list—12.1-in. WXGA TFT (continued) FRU no. RoHS LCD panel, 12.1-in. WXGA for Tablet Digitizer Pen 45N6090 model v 4184-CTO, 25x, 97x v 7448-CTO, 2Ex, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx v 7449-CTO, 25x, 99x, 9Ax, 9Bx, 9Cx, 9Ex, 9Fx, 9Hx v 7450-CTO, 25x, 26x, 28x, 2Ax, 2Cx, 2Dx, 2Fx, 2Gx, 2Hx, 8Yx, 8Zx, 93x, 94x, 95x, 96x, 9Gx, 9Jx, G9x, GAx, v 7453-CTO, 25x, 2Cx, 2Dx, 98x, 9Gx...
Page 165 Table 41. Parts list—12.1-in. WXGA TFT (continued) FRU no. RoHS Integrated camera 39T7498 v 4184-CTO, 8Ex, 97x, E7x, E9x, ENx, ESx v 7448-CTO, 8Dx, 9Dx, 9Kx, E8x, EAx, EPx, EUx, FKx, v 7449-CTO, 84x, 88x, 8Fx, 8Jx, 8Lx, 8Qx, 8Rx, 8Sx, 99x, 9Ax, 9Bx, 9Cx, 9Hx, E8x, EAx, EKx, EPx, EUx, EWx, EYx, FLx, FNx, FWx, FXx v 7450-CTO, 26x, 28x, 2Ax, 2Dx, 2Fx, 2Hx, 86x, 89x,...
Page 166 Table 41. Parts list—12.1-in. WXGA TFT (continued) FRU no. RoHS Wireless LAN/WAN antenna assembly 43Y9830 v 4184-CTO, 25x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx v 7448-CTO, 2Ex, 8Dx, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F5x, F6x, F8x, FAx, FCx, FEx, FGx, FKx, G6x v 7449-CTO, 25x, 84x, 88x, 8Fx, 8Jx, 8Lx, 8Qx, 8Rx, 8Sx,...
Page 167 Table 41. Parts list—12.1-in. WXGA TFT (continued) FRU no. RoHS Wireless LAN/WAN/USB antenna assembly 43Y9829 v 4184-CTO, H4x, H6x v 7448-CTO, H3x, H5x v 7449-CTO v 7450-CTO, GAx, GBx, GCx, GDx, GEx v 7453-CTO v 2263-CTO v 2266-CTO LCD rear cover assembly 45N3121 v 4184-CTO, 25x, 97x v 7448-CTO, 2Ex, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx...
Page 168 Table 41. Parts list—12.1-in. WXGA TFT (continued) FRU no. RoHS Inverter card 42W8052 v 4184-CTO, 25x, 97x v 7448-CTO, 2Ex, 8Vx, 8Wx, 8Xx, 9Dx, 9Kx, 9Lx v 7449-CTO, 25x, 99x, 9Ax, 9Bx, 9Cx, 9Ex, 9Fx, 9Hx v 7450-CTO, 225x, 26x, 28x, 2Ax, 2Cx, 2Dx, 2Fx, 2Gx, 2Hx, 8Yx, 8Zx, 93x, 94x, 95x, 96x, 9Gx, 9Jx, G9x, GAx, v 7453-CTO, 25x, 2Cx, 2Dx, 98x, 9Gx v 2263-CTO...
Page 169: Keyboard
Keyboard Table 42. Parts list—Keyboard Language RoHS Arabic 42T3752 42T3686 Belgian 42T3749 42T3683 Brazilian Portuguese 42T3768 42T3702 Bulgarian 42T4143 42T4139 Canadian French (058) 42T3739 42T3673 Canadian French (Acnor) 42T3738 42T3672 Czech 42T3757 42T3691 Danish 42T3746 42T3680 Dutch 42T3743 42T3677 Finnish, Swedish 42T3744 42T3678 French...
Page 170: Miscellaneous Parts
Miscellaneous parts Table 43. Parts list—Miscellaneous parts RoHS Screw kit: 45N3139 v M1.6 × 6 mm (sliver), wafer head (1) v M2 × 2.5 mm (black), wafer head (1) v M2 × 3.5 mm (silver), wafer head (18) v M2 × 3.5 mm (black), wafer head (1) v M2 ×...
Page 171: Ac Adapters
AC adapters Table 44. Parts list—AC adapters RoHS 2-pin (65 W, 20 V) adapter (models CTO, xxE, xxF, xxJ, xxL, 42T5282 xxP, xxS, xxY, xxU) 2-pin (65 W, 20 V) adapter (models CTO, xxE, xxF, xxJ, xxL, 92P1159 xxP, xxS, xxY, xxU) 2-pin (65 W, 20 V) adapter (models CTO, xxE, xxF, xxJ, xxL, 92P1214 xxP, xxS, xxY, xxU)
Page 172: Power Cords
Power cords A ThinkPad power cord for a specific country or region is usually available only in that country or region: Table 45. Parts list—2-pin power cords Region RoHS Argentina 42T5020 42T5105 v models -CTO, xxY Brazil 42T5180 42T5183 v models -CTO, xxP Canada, U.S.
Page 173: Recovery Discs
Recovery discs Windows XP Tablet DVDs Windows XP Tablet is preinstalled as the operating system in the following models: v 4184-CTO, F5x, F8x, FCx, FGx v 7448-CTO, 8Wx, F5x, F8x, FCx, FGx v 7449-CTO, 84x, 8Fx, 8Jx, 8Rx, 9Ex, 9Fx, EYx, F9x, FNx v 7450-CTO, 2Hx, 9Gx, EYx, FDx, FNx, G4x, L3x v 7453-CTO, 9Gx, FDx v 2263-CTO...
Page 174 Windows Vista Home Premium (32 bit) DVDs Windows Vista Home Premium (32 bit) is preinstalled as the operating system in the following models: v 4184-CTO, 25x, 8Ex, 97x v 7448-CTO, 2Ex, 8Dx, 8Vx, 9Dx, 9Kx, 9Lx v 7449-CTO, 25x v 7450-CTO, 25x v 7453-CTO, 25x v 2263-CTO v 2266-CTO...
Page 175 Windows Vista Business (32 bit) DVDs Windows Vista Business (32 bit) is preinstalled as the operating system in the following models: v 4184-CTO, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F7x, FBx, FFx, H4x, H6x v 7448-CTO, 8Xx, E3x, E5x, E8x, EAx, EEx, EHx, EPx, EUx, F3x, F6x, FAx, FEx, FKx, G6x, H3x, H5x v 7449-CTO, 88x, 8Lx, 8Qx, 8Sx, 99x, 9Ax, 9Bx, 9Cx, 9Hx, E5x, E8x, EAx, EHx, EPx, EUx, EWx, FLx, FWx, FXx, G5x, G6x...
Page 176 Windows Vista Business (64 bit) DVDs Windows Vista Business (64 bit) is preinstalled as the operating system in the following models: v 4184-CTO v 7448-CTO v 7449-CTO, EKx v 7450-CTO, FYx v 7453-CTO v 2263-CTO v 2266-CTO Table 50. Parts list—Windows Vista Business (32 bit) DVDs Language RoHS English...
Page 177 Windows Vista Ultimate (32 bit) DVDs Windows Vista Ultimate (32 bit) is preinstalled as the operating system in the following models: v 4184-CTO v 7448-CTO v 7449-CTO v 7450-CTO, 8Ax v 7453-CTO v 2263-CTO v 2266-CTO Table 51. Parts list—Windows Vista Ultimate (32 bit) DVDs Language RoHS Czech...
Page 178: Common Service Tools
05K9283 USB floppy diskette drive tool kit 27L3452 Test card for integrated Smart Card 42W7820 ThinkPad Hardware Maintenance Diskette Version 1.73 or later — Note: Download the file from the following Web site: http://www.lenovo.com/ ThinkPad X200 Tablet Hardware Maintenance Manual...
Page 179: Notices
Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.
Page 180: Trademarks
Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both: Active Protection System ®...
Page 182 Part Number: 45N3683_01 (1P) P/N: 45N3683_01...

This manual is also suitable for:

7453edu

Lenovo ThinkPad X200 Tablet 7449 Hardware Maintenance Manual

About this Manual

Safety Information

Important Service Information

General Checkout

Related Service Information

Thinkpad X200 Tablet

1130 Bluetooth Daughter Card (BDC-2.1)

Notices

Quick Links

Related Manuals for Lenovo ThinkPad X200 Tablet 7449

Summary of Contents for Lenovo ThinkPad X200 Tablet 7449

This manual is also suitable for:

Table of Contents