D-Link DWL-810 Owner's Manual page 14

2.4ghz ethernet-to-wireless bridge

Hide thumbs Also See for DWL-810:

Table of Contents

Web Configuration

Select Wireless in the menu, as shown. A wireless table will appear as

shown below. The various input fields may be used to configure the 802.11b

wireless and security settings.

Wireless

Fig. 5.4

Operating Mode:

Ad-Hoc - is the default setting.

Choose Ad-Hoc or

Infrastructure. (Connect right out of the box with the Ad-Hoc setting, when

communicating with another device that is also set to Ad-Hoc.)

SSID: (Service Set Identifier) default is the default setting. The SSID is a

unique name that identifies a network. All devices on a network must share

the same SSID name in order to communicate on the network. If you choose

to change the SSID from the default setting, input the SSID of the Access

Point or the Ad-Hoc wireless workgroup to which you wish to connect.

Channel: Channel 6 is the default channel. Input a new number if you

want to change the default setting. All devices on the network must be set to

the same channel to communicate on the network.

Table of Contents

Air dwl-810