Table of Contents
Advertisement
Available languages
Available languages
en Troubleshooting
Troubleshooting
14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting light up.
The LED lighting does
not work.
Side panels of the ap-
pliance are warm.
or
appears in the
temperature display.
26
Cause and troubleshooting
Showroom mode is switched on.
Press and hold
1.
After a short time, check whether your appliance is
2.
cooling.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
Not a fault. The side panels contain pipes which heat
up during the cooling process. Units touching the ap-
pliance will not be damaged by the heat.
No action required.
The electronics have detected a fault.
Switch off the appliance. → Page 18
1.
Disconnect the appliance from the mains.
2.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
Reconnect the appliance after five minutes.
3.
Switch on the appliance. → Page 18
4.
If the message still appears on the display, call cus-
5.
tomer service.
The customer service number can be found in the
enclosed customer service directory.
for at least 15 seconds.
Advertisement
Chapters
Table of Contents
