Table of Contents
Advertisement
To Close:
•
Place finger
as shown
in Figure
4.
•
Slide door
closed
and press
down
firmly
until
it clicks.
Figure 4
To Open:
•
To open the cover,
push the button
as shown
in Figure
5.
•
Cover will
slide
open.
Figure
5
Rinse Aid
To achieve
proper
drying,
always
use a liquid
rinse
aid,
even
if your
detergent
contains
a rinse
aid or
drying
additive.
Note:
The dishwasher
indicates
low rinse aid by turning
on the "Refill Rinse Aid" LED in the display.
If this
light
is on, you need to refill
the rinse aid dispenser
by following
the directions
below.
Adding
Rinse Aid
To avoid
oversudsing
or clogging,
do not overfill
the rinse aid dispenser.
Wipe
up any spills
with
a damp
cloth.
1
Add liquid
rinse
aid to the dispenser
until
it
is ful! (see Figure
6). Do not overfill.
2
Close the lid. Lid must be fully
closed
until it clicks in order
to seal.
3
Wipe
up any excess
rinse
aid that
may have puddled
when
the
dis-
penser
reservoir
is full.
The indicator
light will go out a few moments
after the dishwasher
door is shut.
See page 15 for instructions
on how to adjust the amount of rinse aid dispensed.
Figure
6
Advertisement
Table of Contents
