Table of Contents
Advertisement
Item
Description
Battery
Displays the following according to the
level/
type of power supply driving the unit.
voltage
** min
display
1)
** %
Batt: **V
DC IN: **V
1) Battery level icon display
Display
Description
100% to 91% charge
90% to 71% charge
70% to 51% charge
50% to 31% charge
30% to 11% charge
10% to 0% charge
Subscreen:
Switches streaming on/off. The default value is
OFF. Select ON or OFF using the
button and press the
If streaming cannot be started when Streaming is
set to ON, it is automatically set to OFF, the status
lamp blinks orange for 3 seconds, and the reason
streaming cannot be started appears on the
Message screen.
1)
Displays a battery level icon
and the remaining use time
(minutes) when using an
Info battery.
Displays a battery level icon
and the remaining capacity
(%) when using an Anton/
Bauer digital battery.
Displays the battery
voltage (V) when using a
battery other than the
above or when [Battery
Remain] > [Voltage] is
selected in the web menu.
(See "Power Setting tab"
(page 20))
Displays the input voltage
(V) on the DC IN connector
when using an external
power supply connected to
the DC IN connector.
(Forward)
(Apply) button.
IN/OUT screen
Displays the video input/output settings and
status.
Item
Description
Input
SDI 1: IN
setting
SDI 1-4: IN
Input
QFHD 59.94P QFHD: 3840×2160
signal
QFHD 50P
QFHD 23.98P
FHD 59.94P
FHD 59.94i
FHD 50P
FHD 50i
HD 59.94P
HD 50P
No Signal
Mismatch
Network screen
Main screen:
Displays the network status. Press the
button to display the IP address of the unit on the
subscreen.
Item
<Dest.>
Subscreen:
Displays the selected WAN port (for example,
[LAN: Selected]).
The network link status and IP address of the LAN
connector or USB connector are also displayed.
For details about WAN port selection, see
"Network tab" (page 29).
You can toggle the display between the LAN
connector and USB connectors with each press of
the
(Forward) button.
Press the
(Apply) button to return to the main
screen.
34
Displayed for SDI connector
1 input setting.
Displayed for 3G-SDI (Quad
Link) input setting.
FHD: 1920×1080
HD: 1280×720
Displayed when there is no
input or the input cannot be
detected.
Displayed when the input
signal does not match the
settings.
(Apply)
Description
Displays the transmit
destination name and IP
address configured using
[Destination] on the [Settings]
tab of the [Streaming] page in
the web menu (see "Settings
tab" (page 23)).
Advertisement
Table of Contents
