Table of Contents
Advertisement
IdeaShare
User Guide
Enabling Client-based Projection on the Endpoint
Before using the IdeaShare client for projection, ensure that the client-based
projection function is enabled on the endpoint as follows:
Open the browser of the endpoint or computer and log in to the web interface
(refer to
Wireless Projection > Project with client, and set Project with client to Enable.
If this function is disabled, projection using the IdeaShare client will not be
supported.
Local Projection
To use local projection, perform the following steps:
Step 1 Start the IdeaShare client on your computer or mobile phone.
Step 2 Enter the projection code displayed in the upper right corner of the endpoint, as
shown in
Figure 3-1 Entering the projection code
Step 3 Click Share. Then, the computer or mobile phone screen can be displayed on the
endpoint.
●
Issue 01 (2023-03-30)
Quick Configuration for the login process). Choose Application >
Figure
3-1.
Operations on the computer, as shown in
Copyright © Huawei Technologies Co., Ltd.
3
Projection Function
Figure 3-2
3 Projection Function
7
Advertisement
Table of Contents
