Table of Contents
Advertisement
Pull the water outlet hose out of the connecting piece.
4.
The water outlet hose is connected to the connecting
piece at the factory.
Note: When removing the water outlet hose, liquid may
leak out of the hose or connecting piece.
Do not dispose of or kink the water outlet hose; instead,
store it in a clean, dry place for later use.
Pull the condensation hose out of the holder.
5.
Push the condensation hose as far as it will go onto the
6.
connecting piece.
Tip: To go back to using the water outlet hose to drain the
condensation into the waste water system (e.g. if you
change where the appliance is located), carry out these
steps in reverse order.
4.7 Aligning the appliance
In order to reduce noise and vibrations, align the appliance
correctly.
To align the appliance, turn the appliance feet. Check
▶
that the appliance is level using a spirit level.
All appliance feet must stand firmly on the ground.
4.8 Connecting the appliance to the
electricity supply
Insert the power adapter with the line side into a
1.
suitable socket close to the appliance.
Observe the user manual that is enclosed with the
power adapter.
Insert the mains plug for the appliance's power cord into
2.
the power adapter's load side.
The connection details of the appliance can be found
under Technical data → Page 32 .
Check the power plug is inserted properly.
3.
Installation and connection en-us
11
Advertisement
Table of Contents
