Table of Contents
Advertisement
T_s@tsshsstisS
(ssstisssd)
Your camcorder
gets warm.
• This is because
the power has been turned on for a hmg time. This is not a malfunction.
Turn
off your camcorder
and leave it lk_ra while in a cool place.
106
The power
does
not turn
on.
• The battery pack ix not attached to the camcorder.
Attach a chal'ged hattery pack to the camcorder
(p.21).
• The battery
pack is discharged
or running
low. Charge the battery
pack (p.21).
• The plug of file AC Adaptor has been disconnected
from the wall outlet. Connect
it to the wall
outlet (p.21).
The power
abruptly
turns
off.
• When approximately
5 minutes have elapsed
wlfilc you do not operate
your camcorder,
the
camcorder
is autom ,tically turned off (A.SHUT
OFF). Change
the setting of [A.SHUT
OFF]
(p.80), or mm on the power again, or use the AC Adaptor.
• The battery
pack is discharged
or running
low. Charge the battery
pack (p.21 ).
The CHG (charge)
lamp does not light while the battery pack is being charged.
• Slide the POWER s_ itch to OFF ICHG) (p.21).
• Attach the battery pack to the camcorder correctly (p.21 ).
• Connect the power cord to the wall outlet properly.
• The battery charge ix completed (p.21).
The CHG (charge)
lamp flashes while the battery pack is being charged.
• Attach the battery pack to the camcordcr correctly (p.21). If the problem persists, discolmect
the AC Adaptor from the wall outlet and contact your Sony dealer. The battery pack may be
damaged.
The power turns off frequently
although the remaining battery indicator indicates
that the battery pack has enough power to operate.
• A probh:m has occurred in the remaining battery time indicator, or the battery pack has not
been charged enough. Fully charge the battery again to correct the indication (p.21 ).
The remaining
battery time indicator does not indicate the correct time.
• The temperature of the environment is too high or too lo_. Tbis is not a malfimctknL
• The battery pick has not been ch uged enough. Fully charge the battery again. If the problem
persists, replace the battery pick with a new one (p.21).
• The indicated time may not be correct depending on the environment of use. When you open
or close the LCD screen, it takes about I minute to display the correct remaining batte W time.
The battery pack is quickly discharged.
• The temperature of the environment ix too high or lo_x.This is not a mall]lnctkm.
• The battery pick has not been charged enough. Fully charge the battery again. If the problem
persists, replace the battery pack with a new one (p.21).
Advertisement
Table of Contents
