Table of Contents
Advertisement
are excluded and only the channel numbers that can be
used are displayed for each frequency band.
If there are multiple channel plan candidates, select the
channel plan you want to use for each frequency band.
Viewing the current frequency list
Click [Summary of channels].
The frequencies available for use in the selected
channel plan are listed for each frequency band.
8
Assign the selected channel plan to the receiver.
Automatic assignment
Click [Auto].
Starting with the lowest-frequency plans in the
channel plan list, the frequencies are automatically
assigned to the receiver's receiver channels.
Individual assignment
Select a receiver channel from the receiver channel
list, and then select the frequency you want to assign
in the channel plan list.
Click the T button to assign the frequency to the
receiver channel.
To cancel an assignment
Select the respective receiver channel in the receiver
channel list, and click the t button to cancel the
assignment.
9
When you finish assignments for all the receiver
channels, click [Next >].
The frequency assignment settings are sent to the
receiver.
10
If necessary, enable or disable [Reflect recommended
GP/CH], and then click [Finish].
[Channel Plan Adviser] closes.
If the [Reflect recommended GP/CH] checkbox is
selected, only the groups and channels recommended
by [Channel Plan Adviser] will be selectable on
Wireless Studio. The groups and channels
recommended by [Channel Plan Adviser] will be
displayed in the [Spectrum Analyzer] tab of the sub
window. In addition, the receivers that will perform
scanning for the frequency band selected in step 2 will
be selected automatically in the [Scan parameter]
window.
For details, see "Target receiver selection" in the
"[Scan parameter] window" section on page 41.
Note
The [Reflect recommended GP/CH] setting can be
changed at any time in the [GP/CH display setting]
window.
For details, see "[GP/CH display setting] Window"
on page 53.
Work files
In [Channel Plan Adviser], you can save the information
entered for each step to a work file (.cpa) and load the work
file whenever necessary.
The following is saved to a work file.
• Target frequency bands
(entered in step 2 of "Selecting the channel plan")
• TV Channels
(entered in step 3 of "Selecting the channel plan")
• Frequencies used by other wireless devices
(entered in step 4 of "Selecting the channel plan")
• Channel scan conditions and scan results
(entered in step 5 of "Selecting the channel plan")
• Conditions for avoiding interference
(entered in step 6 of "Selecting the channel plan")
• Selected channel plan
(entered in step 7 of "Selecting the channel plan")
For details, see "Selecting the channel plan" on page 49.
51
Advertisement
Table of Contents
