Table of Contents
Advertisement
Interior lighting
Risk of electric shock due to exposed, live electrical components.
When removing the lighting cover, there is a risk of coming into contact with live
electrical components.
Do not remove the lighting cover. The LED lighting may only be repaired or re-
placed by the Miele Customer Service Department.
Risk of injury from LED lighting.
This lighting corresponds to risk group RG 2. If the cover is defective, there is a
risk of eye injury.
If the lighting cover is defective, do not look from a close range directly into the
lighting with optical instruments (e.g. magnifying glass or similar).
Problem
The interior lighting is
not working.
The interior lighting is
pulsating.
Cause and remedy
The refrigeration appliance has not been switched
on.
Switch the refrigeration appliance on.
Sabbath mode is switched on: the display is dark
and the refrigeration appliance is cooling.
Touch OK.
will appear in the display.
Touch OK.
When the Sabbath mode function is switched on, a
dot appears in the upper corner of the display
Touch OK.
When the Sabbath mode function is switched off,
the dot in the upper corner of the display goes out.
To avoid overheating, the lighting switches itself off
automatically after approx. 15 minutes if the appli-
ance door is left open. If this is not the case, then
there is a fault.
Call the Miele Customer Service Department.
This is not a fault. The door alarm has been activ-
ated. The interior lighting pulsates along with the
alarm.
Problem solving guide
.
83
Advertisement
Table of Contents
