Advertisement
Cabinet Separation
for WS-65315 and WS=65315A
his TV is very heavy!
Exercise extreme
care when moving TV as foreign matedaU may become
mbedded
in the castor wheeUs which couUd damage
wood or other deUicate flooring.
For Mitsubishi
Dealers
and Service
Personnel
ONLY
This Mitsubishi
projection
television
cabinet
has been assembled
in two pieces.
These pieces may be separated
to allow for easier delivery and setup.
The instructions
below show how to safely separate
and reattach
the cabinet.
e This projection
television
weighs
over 320 pounds
and has many
sensitive
components.
e Any dismantling
procedure
should
be done by authorized
Mitsubishi
Dealers
or Service
Personnel
ONLY.
The following operations should be performed
by two people:
1.Remove the decorative
Plastic covers (2) on each side of the
cabinet and then remove the exposed screws (2) on each
side.
Plastic covers,
screws
2. Remove the Speaker grille by pulling it straight off the cabinet.
3. Disconnect the connector
(ZF).
[]
............
Speakergrille
4. Carefullyliftthe
Cabinet-Topstraight
up untilthe
bracketsare
clearfromtheCabinet-Bottom.
DONOTusetheScreen
Frame Bottom when lifting the Cabinet-Top.
5. Carefully place the Cabinet-Top
on to the floor.
6. Aftermovingand
positioningtheCabinet-Bottom
inits
3._onnector(ZF)
desired location, reversethe
procedureand
mountthe
Cabinet-Top
on the Cabinet-Bottom.
Be sure you align the
brackets properly. Keep fingers clear of all joints!
Reconnect
the connector,
replacethe
speakergrille,
screws and
decorative
plastic covers.
Cabinet-Top
Screen
i
I_
Frame
i
z_
[]
_
_ --
.............................................................
...Brackets
Cabinet
Bottom
Advertisement
