Table of Contents
Advertisement
When "daylight saving" is "on", the real time clock will be
adjusted automatically at the daylight saving time (e.g. April
5, 2015, 02.00 o'clock: time will be set 1 hour later or October
25, 2015, 02.00 o'clock: time will be set 1 hour earlier).
Schedule
This function allows you to program up to 7 (seven) different
scheduled time intervals for the display to activate.
You can select:
•
The time for the display to turn On and Off.
•
The days in a week for the display to activate.
•
Which input source the display will use for each
scheduled activation period.
NOTE:
It is recommended that you set up the current date
and time in the {Date and time} menu before using
this function.
1. Press [OK] or [ ] button to enter the submenu.
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
2. Press [ ] or [ ] button to select a schedule item (item
number 1 - 7), and press [OK] or [ ] button to enter the
submenu.
Schedule 1
Status
Schedule 2
Source
Schedule 3
On Time
Schedule 4
Off Time
Schedule 5
Repeat Modes
Schedule 6
USB Play List
Schedule 7
Brightness
•
{Status} - Press [ ] or [ ] button to select the status On
or Off.
{Source} - Press [ ] or [ ] button to select the input
•
source.
{On Time} - Press [ ] or [ ] button to adjust and the
•
display will turn on at the specified time.
{Off Time} - Press [ ] or [ ] button to adjust and the
•
display will turn off at the specified time.
Leave hour and minute options empty if you do not want
to use the function of power-on or power-off schedule.
•
{Repeat Modes} -Press [ ] button to select which day in
a week this schedule item will take effect, and then press
the [OK] button.
•
{USB Play List} - Press [ ] or [ ] button to select playlist
index for Media Player source.
None: no playlist, autoplay function depends on {OPTION}
-> {USB Autoplay}.
On
HDMI1
--
:
--
--
:
--
None
Off
37
1~7: playlist number.
USB Autoplay: autoplay function.
•
{Brightness} – Turn on the option then adjust the
Brightness value, the Brightness will be adjusted to this
value when the Schedule is started.
NOTE:
The scheduler cannot work across midnight in one
schedule with no repeats or only one day is selected for
the schedule.
3. For additional schedule settings, press [
the steps above. A check mark in the box next to the
number of the schedule item indicates that the selected
schedule is active.
NOTES:
•
If the schedules overlap, the scheduled power-on time
takes priority over scheduled power-off time.
•
If there are two schedule items programmed for the same
time, the highest numbered schedule takes priority. For
example, if schedule items #1 and #2 both set the display
to power on at 7:00 AM and off at 5:00 PM, then only
schedule item # 2 will take effect.
HDMI with One Wire
CEC control.
•
{Off} - Disable CEC.(Default)
•
{On} - Enable CEC.
HDMI with One Wire Power off
Only available if "HDMI with One Wire" is On.
•
{Off} - System Standby disable. (Default)
•
{On} - System Standby enables.
NOTES: Only support CEC command 0x36.
Auto Signal Detection
This function allows the display to detect and display
available signal sources automatically.
•
{Off} - Once an input is connected, it can only be selected
manually.
If the selected input has signal, set the system to display the
image automatically according to the search order of each
option.
The options are: {Auto} / {Failover}
•
{Auto}: Dispalyport->VGA->DVI-I->HDMI1->HDMI2
->HDMI3->Media Player
•
{Failover}
-
Failover 1: User-defined setting. Default:HDMI 1.
-
Failover 2: User-defined setting. Default:HDMI 1.
-
Failover 3: User-defined setting. Default:HDMI 1.
-
Failover 4: User-defined setting. Default:HDMI 1.
-
Failover 5: User-defined setting. Default:HDMI 1.
-
Failover 6: User-defined setting. Default:HDMI 1.
-
Failover 7: User-defined setting. Default:HDMI 1.
If the primary signal is lost then the display will begin failover
by searching for the next available source that is defined in
the priority list.
Please note that failover will suspend under the following
conditions and failover will resume when signal is lost again.
-
Boot On Source : When the display is powered on, it will
75BDL4003H
], then repeat
Advertisement
Table of Contents
Troubleshooting
