Table of Contents
Advertisement
3 Operation
3
Operation
CAUTION
The wired foot switch must always remain connected to your X-ray system and be available for clinical
use when using the wireless foot switch. If image acquisition cannot be started using the wireless foot
switch, you can continue the procedure with the wired foot switch.
When using the wireless foot switch, observe the following guidelines:
• Only use the wireless foot switch on a horizontal surface.
• Do not tilt or move the wireless foot switch during use as this may cause the wireless foot switch to
switch off, causing the immediate cancellation of signals and loss of functionality.
• Ensure that the wireless foot switch is used at a maximum distance of 10 m from the receiver. The
location of the receiver depends on your system configuration; it is located either inside the patient
table base or in the surgery wall connection box.
• Do not use the charging cable to move, transport, or store the wireless foot switch.
• Avoid driving over the charging cable with other devices or equipment.
• Avoid pressing any of the wireless foot switch pedals or buttons while the X-ray system is starting as
this may inhibit the start-up process.
3.1
Wireless Foot Switch Functions
Monoplane Functions
The functions that are assigned to each switch are configured when your system is installed. A label is
placed next to each switch to indicate the assigned function.
The following functions are always assigned to a switch.
Mandatory Functions
One of the following functions can be assigned to the remaining switch. The functions that are available
depend on the version of your system.
Optional Functions
Biplane Functions
The functions that are assigned to each switch are configured when your system is installed. A label is
placed next to each switch to indicate the assigned function.
The following functions are always assigned to a switch. Some function labels differ slightly depending
on the model of your foot switch. For more information about the model types, see
Labels (page
Wireless Foot Switch Addendum
Perform fluoroscopy
Prepare and perform exposure
Fluoro Store function
Prepare and perform single-shot exposure
15).
Switch the room light on and off
Copy as photo image function
8
Wireless Foot Switch Functions
Equipment
Philips 4523 001 21821
Advertisement
Table of Contents
