Advertisement
Available languages
Available languages
Cart
2
To attach the side panels, align the side panel holes with the bottom panel holes on each side
of the bottom shelf. Note: Left side panel has the match holder attachment.
Attach, but do not fully tighten, the left and right side panels to the bottom shelf with (6)
M6x13 screws. Leave a small gap beneath the screw heads for easier attachment of panels,
brackets and bars in the following steps on this page. (A)
Attach the back panel to the bottom shelf and the two side panels with (8) M4x10 screws. (B)
Align the door bracket holes with the holes on the side panels. Attach the door bracket to the
side panels with (4) M4x10 screws. (C) Note: Attach the bracket so that magnets are on top.
Align the holes in the cart support angle bars with the holes on the bottom shelf and the side
panels. Attach the angle bars with (8) M4x10 screws. (D) Now fully tighten the 6 screws
attaching the side panels to the bottom shelf.
M6x13 Screw
Qty: 6 pcs
A
C
M4x10 Screw
Qty: 20 pcs
20
B
D
Advertisement
